Originally Posted by
tc3team
I don't run F1, but what size track are you racing at? (this might help someone else give you a starting point).
Also if you are using foams, obviously gearing will play into the setup too, as they wear down.
The cars are quite light so you might need to use less boost than other classes but again it really depends on track size and the length of the straight and so on....
As for delay. I would possibly try 0.3 as a starting point, ramp 2 and go from there but it is a guess. Watching motor temperatures is also a key point.
our track is old car park so low grip with lot of corner and small straight. i use rubber tire with weight at 1100 gram