R/C Tech Forums
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)
-   Rookie Zone (https://www.rctech.net/forum/rookie-zone-7/)
-   -   PLEASE HELP ME!!!!!!!!! (https://www.rctech.net/forum/rookie-zone/943187-please-help-me.html)

jfly260 06-06-2016 07:14 AM
Fitting a motor
 
I have a brushless motor and esc for my 1/18 car and the pinion doesn't fit the shaft, and the motor mount holes line up but i need a bigger screw. could i possibly drill out the pinion to make it fit the shaft, and drill bigger holes in the motor mount to put the bigger screws in. The two screws from my 1/10 fit perfectly.

roadrashracing2 06-06-2016 07:24 AM
Sounds like you got the wrong size motor.


All times are GMT -7. It is currently 02:14 PM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.