Go Back  R/C Tech Forums > Commercial/Retail Forums > rcMart.com Mega Online R/C Marketplace
3Racing (KIT-F109) F1-09 1/10 RC Formula 1 EP - New Arrival >

3Racing (KIT-F109) F1-09 1/10 RC Formula 1 EP - New Arrival

3Racing (KIT-F109) F1-09 1/10 RC Formula 1 EP - New Arrival

 
Old 09-15-2009, 02:46 AM
  #1  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default 3Racing (KIT-F109) F1-09 1/10 RC Formula 1 EP - New Arrival


*Click the image to buy
The 3Racing (KIT-F109) F1-09 1/10 RC Formula 1 Car EP have just arrived rcMart.com.
Overview
3RACING is one of the most famous RC optional parts manufacturers in the world. We have over 20 years of experience in the RC industry, that we are extremely familiar with the essential RC racing technologies. Today we like to announce the birth of our complete RC car kit - the ALL-NEW F109 1/10 Formula 1.
Formula 1 is the highest class of car racing in the world. We are very pleased to introduce the new 1/10 scale F1 kit, which is a high quality, durable, and extremely fast car offering the best possible handling at a highly competitive price.


Tweaking System
The traditional T-Plate design has been given up on the F109. Instead, a special mechanism basing on ball joint is used as the tweaking system to make the chassis more durable and stable. The new rear chassis design deploys a composite of a pair of ball joints and central pivot ball, plus side spring and monoshock as absorber and buffer. The up-and-down rear movement can be controlled entirely through the high capacity central shock.

Motor Mount
The motor mount was built using high quality 6061-T6 aluminum with a very versatile design. The height of the rear wing is also adjustable V it can be adjusted with 3 different degrees of up-and-down movement using axle adaptor 0, 1 and 2. It is fully tunable for meeting the demands of the modern day racing environments.

Weight Centralized
The battery is centrally mounted through a special Quick Change feature, allowing fast and easy battery replacement without the need to struggle through the limited space. As the battery is centrally oriented, weight can be centralized to allow for better control of the car as a whole.

Suspension System
The front suspension system is highly flexible in that camber adjustment is fully allowed. Springs of different stiffness are included in the package so you may fine tune the system as you see fit without the need to shop for alternative shock absorbers from somewhere else.

Chassis
The chassis is built with 2.5mm fiber glass material which is strong and light-weight, and is much less costly when compared with its graphite counterpart. The car was tested with a high speed brushless system and the chassis was found to be of sufficient strength for sustaining the stress and load brought by the brushless horsepower.
Features
# Precision cut FRP 2.5mm main chassis and 2.0mm upper desk.
# King pin coil spring independently front suspension.
# Rear suspension uses friction dampers and floating mono shock.
# Aluminum mono shock.
# Aluminum ball differential.
# Full ball bearings.
# Longitudinally placed servo (Isometric steering load applied).
# Lightweight differential joint.
# Height adjustable alloy gear case.
# Rear suspension ball mount.
# Realistic detailed lexan polycarbonate body.
# Front and rear wings.
# Front and rear foam tires and rims.
# ESC, 2-channel R/C system, 7.2V battery and charger separately required.
Specifications:
Scale 1/10 Steering Direct steering with servo saver. Suspension Front king ping coil spring.
Central shock. Shocks Floating mono damper. Transmission Direct drive 2WD. Gear Ratio 96/23 Length 450mm Width 200mm Height 110mm Wheelbase 270mm Tread (F) 167mm Tread (R) 155mm Tire Width F 30mm; R 45mm Tire Size F 57mm; R 57mm Overall Weight 610g Shell Weight 42g Net Weight 568g Specification maybe subject to change.
Source: 3Racing
Where to buy?
http://www.rcmart.com/catalog/rc-3ra...a-p-29740.html
rcmart is offline  
Old 09-19-2009, 12:24 PM
  #2  
Tech Apprentice
 
antonio_cadiz's Avatar
 
Join Date: Oct 2008
Posts: 91
Default

kit does not bring pinion, please you can say to me that pitch is.

thanks
antonio_cadiz is offline  
 

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.