Go Back  R/C Tech Forums > Commercial/Retail Forums > rcMart.com Mega Online R/C Marketplace
IMPORTANT: New Product Arrival Alert! (March 2009) >

IMPORTANT: New Product Arrival Alert! (March 2009)

IMPORTANT: New Product Arrival Alert! (March 2009)

 
Old 03-08-2009, 11:51 PM
  #16  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default Tamiya ORC AMEMIYA SGC-7 (TB-03 CHASSIS)

Tamiya ORC AMEMIYA SGC-7 (TB-03 CHASSIS)


~New Arrival~

1 / 10 Electric RC Car Series No.425
ORC AMEMIYA SGC-7 (TB-03 CHASSIS)
Item No: 58425



Translation from Tamiya

[The challenge of the isolated] now RC race car - square off Super GT’s GT500 class works. Meanwhile, more than 20 machines crush the GT300 is a battleground state in the privateer class. Among a variety of machines, the only rotary engine as the car fought the 2008 season, ORC Amemiya SGC-7 electric RC car assembly kit. Mazda RX-7 to reproduce the full realization in the form of polycarbonate finish the race car base. Chassis in which the Board FURONTOSASU, upright motor shaft drive 4WD of the TB-03. The sharp run-bodied and is a real RC cars make the race.




[SUETA a race against four wheel drive shaft, TB-03 chassis] adopted motor shaft drive chassis is a standard upright Parts 4WD Race for the basic TB-03. BASUTABUFUREMU high dust and mold with a low center of gravity to MOTAKURINGUDAKUTO. The propeller shaft of the split type and high efficiency, with around a ball differential. Seek further efficiency and drive, also achieved a good improvement. INBODOTAIPU the front suspension and four-wheel DABURUUISSHUBON. Furthermore, SHOTORIBASHIBURUSASUAMU, TRF416 PYUARESA use around the upright. HAIPOTENSHARUSHASHI is incorporating expertise from throughout the combat.



Basic Specifications
Overall length: 459mm
Width 191mm, height 110m
body weight 1077g
Wheelbase: 257mm
Tread with around 165mm
Motor = RS540 type
Drive system = vertical position motor drive shaft 4WD
system DEFUGIYA F / R both
ball differential
SUTEARINGUTAIRODDO = 3-part Suspension
F / R co = DABURUUISSHUBON
Damper = F / R CVA co OIRUDANPASUPAMINI
GIYARESHIO = 7.09: 1
tires = F / R both width / diameter 24mm / 64mm
speed controller = ESC specification

Where to buy ?
http://www.rcmart.com/catalog/rc-tam...cPath=420_1167

MORE INFORMATION ABOUT TB-03 PLEASE CLICK
http://www.tamiya.com/japan/products...m#tb03_chassis

Source : Tamiya
rcmart is offline  
Old 03-09-2009, 12:02 AM
  #17  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default Tamiya NISMO R34 GT-R Z-Tune TT01D Drift Spec

Tamiya NISMO R34 GT-R Z-Tune TT01D Drift Spec

~NEW ARRIVAL~

Tamiya NISMO R34 GT-R Z-Tune TT01D Drift Spec



Tamiya (#58419) 1:10 TT-01D NISMO R34 GT-R Z-Tune W/ESC EP

The world famous Nissan NISMO R34 GT-R Z-Tune now comes loaded on the impressive drift spec TT-01D chassis and is just waiting for you to drift it around the track.


~Based on the lightweight and user-friendly TT-01 chassis for effortless assembly.
~4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox.
~Drift-spec modifications include special suspension tuning, full ball bearings, sport-tuned motor, aluminum heat sink, CVA mini shock dampers and short springs and adjustable upper arms.
~Polycarbonate body captures the GT-R’s beautiful shape including parts such as the front and rear fenders, wing, and the hood’s air outlet.
~Super Driftech tires are made from resin and rubber compound specially designed for long-lasting drift action.
~Includes Electronic Speed Controller (TEU-101 BK) and RS-540 Sport Tuned Motor.
~Includes LED Light Unit (TLU-01) and 2 x white LED’s (Front) and 2 x red LED’s (Rear).
~Add separately available LED lights for a greater sense of realism.
~Add Tamiya LED Light Control Unit (TLU-02) Item 53937 for more control of light operations.
~Wide variety of tune-up parts are separately available to further customize your machine.
~2-channel R/C system, 7.2V battery and charger separately required.
Source : Tamiya

Where to buy ?
http://www.rcmart.com/catalog/rc-tam...cPath=420_1167
rcmart is offline  
Old 03-10-2009, 08:07 PM
  #18  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default Tamiya PORSCHE 911 GT3 CUP Team KTR (TT-01 TYPE-E)

Tamiya PORSCHE 911 GT3 CUP Team KTR (TT-01 TYPE-E)

~New Arrival~

1 / 10 Electric RC Car Series No.422
PORSCHE 911 GT3 CUP Team KTR (TT-01 TYPE-E CHASSIS)
Item No:58422



Translation from Tamiya
[The regulation] KARERAKAPPUJAPAN in his own world PORUSHEKARERAKAPPU eight are held by countries and regions worldwide places. Held in Japan from 2008 to KARERAKAPPUJAPAN sponsored by KRH race, driving his players by Isao Yoshinari already assembled kit of the Team KTR RAJIOKONTORORUKA reproduce the electric car. The full body modeling experience is a unique form of polycarbonate. KI MEMASU door mirrors and rear wing is available in detail the different parts. Also, the set of marked with stickers and coloring GARIMASU easily. In addition, the headlight 2 light (white), two tail lights (red) high brightness LED light you can enjoy the set.



[Shaft 4WD, TT-01 TYPE-E Chassis] is adopted, the 4WD MOTA・SHAFUTODORAIBU Vertical TT-01 TYPE-E. To the mainframe of bathtub type, and ensure high rigidity chassis, gear and equipment to cover the upper deck of a glass fiber reinforced nylon plastic. Steering system is smooth-moving 3-division play less. Design and low center of gravity and good balance DABURUUISSHUBONSASUPENSHON four-wheel, combined with equipment and DEFUGIYA around to demonstrate the characteristics of a steering controller Bull. The black mesh wheels good, RESHINGUSURIKKUTAIYA set.

Basic Specifications
Overall length: 465mm
Width 195mm
height 134mm
Wheelbase: 251mm
Tire Width / diameter = FR 27/67mm both
Frame = bathtub type motor drive system
SHAFUTODORAIBUFURUTAIMU Vertical = 4WD
3-Tie Rod Steering
suspension = 4 DABURUUISSHUBON split ring around Damper
friction with gear ratio = 8.35:1
Motor = 540 type
speed controller = ESC specification

Where to buy?
http://www.rcmart.com/catalog/rc-tam...cPath=420_1167

Source Tamiya
rcmart is offline  
Old 03-10-2009, 08:14 PM
  #19  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default ABC Hobby - M-Chassis Nissan Fairlady Z

ABC Hobby - M-Chassis Nissan Fairlady Z

~NEW ARRIVAL~


ABC Hobby (#24200) Genetic Fairlady Z



Translation from ABC Hobby :
Z now continue the history of the origin of all that here.
40 also appeared to look after the current year, the styling also feels a speck old. The reason is, Z is nothing else to ITA styling and the ultimate already appeared at the time. The first S30 Fairlady Z faithfully reproduced with the ultimate styling of the 1 / 10 M-Chassis Nissan Fairlady Z, a legendary life of 1 / 10 to be indoctrinated in the world of M-Chassis !


ABC’s new-generation technology hobby, 3DCAD CG body in shape and full HAIDIFINISHONDEKARU, fully reproduce the fine detail from the body shape! The emblem is a version of both domestic and export several versions, is equipped with rear SAIDORIFUREKUTA included only export specifications. This Z Z432 240Z DATSUN240Z (export version) can be reproduced.



Body Clear Body and unpainted state, in your favorite color to paint with Z can work out! Shimo Makoto Akira Makoto to reproduce the colors of the time, Shimo Makoto modern finish in custom colors, and expand the imagination excited.
Fairlady Z to support the drive chassis has been made in the design of high-performance JENETIKKUSHASHI low center of gravity. A reputation of stability and driving JENETIKKUSHASHI, tells us the depth of the back of the drive and enjoyment of RAJIKON from beginner to advanced.



■ Features JENETIKKUSHASHI
Shaft Drive 4WD
DABURUDEKKISHASHI
Ball differential

■ standard JENETIKKUSHASHI
ARUMIMOTAMAUNTO (formula clamp)
SHISURUOIRUDANPA
Universal Joint
Foil (White)
Tires

■ JENETIKKUSHASHITEKUNIKARUDETA
Overall length: 295mm
Width: 157mm-163mm
RODOKURIARANSU: 5mm
Foil base: 208mm
Tire diameter: 55mm

■ Nissan Fair Lady Z (S30) KURIABODIDETA
Overall length / Length: 382mm
Width / Width: 160mm
Foil-based / WheelBase: 208mm
Accessories: Light-only cover masking film decals
With: Decal. Masking Film. Light Bucket

Fair Lady Z (S30) 1969-1978

Fair Lady Z,Japan’s first sports car that was made shortly after the war’s DATTOSANSUPOTSU DC-3 (1952), dating back to the. 1954 Auto Show was first held in Japan (Tokyo Motor Show today), which was exhibited in the car, gave a big impact in those days was a dream car for people to say things. The planning for this show, the Z man after he called the American Automobile Hall of Fame father’s car, it’s Mr. K, Katayama Yutaka was.
At the time, Katayama was enrolled in Public Relations Division of the Nissan had a vision. The判RI to appeal to the masses more attractive not only sports car of the car. Sports car design is beautiful in the wild win the hearts of the masses in the period of time. Demand for the automotive industry and the need to educate the public. Era, it was not important and what is public relations, but has continued to practice and learn it faster than anyone else. The first domestic sports, racing and winning the rally, Fair Lady Z and development …

Katayama was at the time president of Nissan North America, was promoted in newspaper ads as Z.

This is a special racing car. We are a sports car for you,

Long drive reliability to withstand the harsh Americas huge trunks full pace, good gas mileage, low prices … beautiful design and it seems everyone is watching. They filled a real sports car, Fairlady Z, the realization that hold a variety of ideas and efforts. Production vehicles diverted from other parts to most of the low cost, Cedric the old design was to focus on venture-maintenance and durability than the peak performance of L-type engine. This choice is cheap and accessible, reliable and durable parts, and the benefits created, 40 have emerged as one of the individual factors are still relatively good condition after a year.
Was pumped at a low price below half of Porsche and Z is a huge hit record and release more than imagination. The initial production was scheduled at the peak with 10 more than the order was unusual and popular vehicles waiting up to six months. China even more success in a spectacular race car, MG and Triumph boasts wins against the Porsche sports car in the world and said, his DATTOSAN (Nissan North America) and of a strong brand image.

Fair Lady Z S30-1969 from the 1978 debut of the S130, like between FURUMODERUCHENJI was added to the type of models.
Skyline GT-R (KPGC10) of the S20 engine to race officials and some of the Z432 and A sold-class license holder only Z432R (regular Z432 acrylic glass in a close up of the body than have made necessary 80kg lighter), the North America version 2.4 was released in Japan a liter 240Z, and G-equipped nose 240ZG, added a back seat body stretched 2by2. 9 years and over the long term Total sales worldwide production continues to be his amazing numbers, 55 million say.

Once the flow ceased Fair Lady Z 2002, playing as a symbol of Nissan’s Carlos Ghosn, CEO of the stunning revival under a new regime. And in 2008, the latest Z34 model appeared. The design of the original Z33 Z was thinking more massive than the compact . Wild styling appeal to the emotions of the people, not designed to show off the mechanical performance, as a foot of daily RERE SUPOTSUDORAIBINGU If the answer to that whip, price and easy to reach by hand … the spirit of the Z, be immortal now.

Where to buy ?
http://www.rcmart.com/catalog/rc-hob...cPath=420_1176

Source : ABC Hobby

Where to buy ?
ABC Hobby (#24018) Genetic Celica 1600
http://www.rcmart.com/catalog/rc-hob...cPath=420_1176
ABC Hobby <Genetic> Kits and products
http://www.rcmart.com/catalog/advanc...ywords=Genetic
rcmart is offline  
Old 03-10-2009, 08:33 PM
  #20  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default Yeah Racing Rubber Tires Set For 1:18 RC Truggy / Truck

Yeah Racing Rubber Tires Set For 1:18 RC Truggy / Truck




Fit for 1:18 Truggy / Truck Series


Many Choices


Yeah Racing Rubber Tires Fit for Other Brand Rim!!
Team Losi Mini-T:
http://www.rcmart.com/catalog/minit-..._1032_582.html
Xray M18
http://www.rcmart.com/catalog/advanc...rds=Wheel+M18T
Associated RC18
http://www.rcmart.com/catalog/rc18t-...7_621_642.html

Where to Buy?
http://www.rcmart.com/catalog/minit-..._1032_582.html
rcmart is offline  
Old 03-10-2009, 09:24 PM
  #21  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default HPI EP 1/10 Cup Racer 4WD M-Chassis new arrival

HPI EP 1/10 Cup Racer 4WD M-Chassis new arrival



Translation from HPI

And those RIARUSUKERUBODI 1 / 10 RITORUSUPOTSUSHASHI package. Cup racers, HPI was fused with a high level of performance and cool stick. Full-time 4WD drive system chassis, FRP double deck structure, specification aluminum center shaft HAISUPEKKU adoption. Choose to match the body with two of the 210mm and 225mm FURONTOSHOKKUREIAUTO and also features adjustable wheelbase and I am happy to pick and choose. With the body, and pursue the reality of the body to adopt PURAPATSU.


Ultimate Scale Realism

Cup racers and TOURUTENSUKERU concept of “the most realistic RC model car looks great.” HPI technical designers the world body, will gather strength design, as reproduced in the real TOURUTENRUKKUSU. Cup racers are not only focused on the performance scale model, width, length, SHIMASHITA to vehicle dimensions and infinite detail.

Authentic Detailing
TOURUTENSHIRIZU attention to design detail than ever before. Polycarbonate body is a faithful reproduction of the vehicle body lines and curves. Door line, trunk, side skirts, like vehicle. Wipers, bumper, muffler, mirror our reality and reproduction parts.



Ready to Perform
Cup racer chassis is not simply aimed at TOURUTENSUKERU, our driving performance. Equipped with an oil shock in the standard kit, each linkage FURUAJASUTABURUTAIPU adopted. FURONTOGIYADEFU, high stability in the adoption of RIABORUDEFU.

Cup racers easy handling, ease of assembly, of course, the design KODAWARIMASHITA. Grid and lightweight, battery holders, improving the cooling performance, and streamlined to the maximum of MEINSHASHI scale RC car that has been eagerly-awaited completion.

Where to buy ?
HPI (#100600) 1:10 Cup Racer 1M/ Datsun 240Z Mini EP
http://www.rcmart.com/catalog/rc-100...cPath=420_1174





DRIFT Version
Cup racing is not just GURIPPUBAJON lineup drift version. Sale of T-DRIFT enjoy traveling with a drift to the drift-only tire and tire using the same compound.



Where to buy ?
DRIFT Version~~Coming Soon

Source : HPI
rcmart is offline  
Old 03-10-2009, 09:46 PM
  #22  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default Yeah Racing Ultimate Brainpower ESC / Motor Set Restocked!

Yeah Racing Ultimate Brainpower ESC / Motor Set Restocked!



Yeah Racing would like to THANK all of the Ultimate Brainpower ESC, Motor and Program Card supporter by choosing their products. Most of the Ultimate Brainpower ESC and Motor has been restocked. Also, with a brand new (#BM-0015) 35A ESC and 13T Motor combo set.

The following Yeah Racing Ultimate Brainpower items has been restocked:


- Yeah Racing (#BM-0004) Ultimate Brainpower ESC 35A & 10T Sensorless Brushless Motor Set
- Yeah Racing (#BM-0007) Ultimate Brainpower 9T Sensorless Brushless Motor
- Yeah Racing (#BM-0008) Ultimate Brainpower 10T Sensorless Brushless Motor
- Yeah Racing (#BM-0010) Ultimate Brainpower 13T Sensorless Brushless Motor
- Yeah Racing (#BM-0012) Ultimate Brainpower ESC 35A & 9T Sensorless Brushless Motor Set
- Yeah Racing (#BM-0015) Ultimate Brainpower ESC 35A & 13T Sensorless Brushless Motor Set

Where to buy?
http://www.rcmart.com/catalog/advanc...rds=brainpower
rcmart is offline  
Old 03-10-2009, 10:00 PM
  #23  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default Axial AX10 / New SCX 10 Rock Crawler In Stock!!

Axial AX10 / New SCX 10 Rock Crawler In Stock!!



Axial Scorpion AX10 Rock Crawler RTR (#AX90002) and ARTR (#AX90004) are back in stock now!! And the brand new SCX 10 (#AX90007) which going to arrive very soon @ rcMart.com!
Please be hurry, stock limited!

Where to buy?
http://www.rcmart.com/catalog/axial-m-309.html
rcmart is offline  
Old 03-10-2009, 11:08 PM
  #24  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default Yeah Racing Tornado High Speed Cooling Fan Just Arrived!

Yeah Racing Tornado High Speed Cooling Fan Just Arrived!

Yeah Racing (#YA-0180) Tornado Cooling Fan (30×30x10mm) has arrived!!



http://www.youtube.com/watch?v=160w7...-just-arrived/

Need something more powerful than your existing motor / ESC fan? This is exactly the cooling fan for you.
Yeah Racing Tornado Cooling Fan has Ultra High Speed. You need unmatched performance that this fan delivers. This dual ball bearing fan flows up to 100% more air than other similar Fan.

where to buy?
http://www.rcmart.com/catalog/rc-yea...cPath=293_1303


Specification
Dimensions: 30 x 30 x 10mm
Bearing: Dual Ball Bearing
Operating: Voltage 5V
Start-up Voltage: 3V
Power: 1.40W
Fan Speed: 14000 R.P.M (±20%) at 25℃, after 3 min. rotating.
Max Air Flow: 5.501CFM
Current: 0.28A
Weight: 9.0g
Connector: JST

Source: yeahracing
rcmart is offline  
Old 03-10-2009, 11:58 PM
  #25  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default BOL Super Cool RC Battery Heat Sink On Sale

BOL Super Cool RC Battery Heat Sink On Sale

For Better Maintainance of your RC battery, BOL super Cool heat sink is your best pal! It helps cooling down your battery during charging or after race! Your battery can last longer at high performance! You may use it also as car stand to cool down your rc car after race! Good news, rcmart has it now at discounted price!

Where to buy ?
http://www.rcmart.com/catalog/rc-bat...l?cPath=52_954
rcmart is offline  
Old 03-11-2009, 12:30 AM
  #26  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default 7.4V LiPo Battery Combo with FREE voltage reader

7.4V LiPo Battery Combo with FREE voltage reader

Get a FREE Li-Po battery voltage reader when you get 2 packs Yeah Racing 3600mah Hard Case LiPo battery. Click the link below to buy the Li-Po battery combo.
http://www.rcmart.com/catalog/rc-bat...Path=1100_1249

http://www.youtube.com/watch?v=O3oGh...oltage-reader/
rcmart is offline  
Old 03-11-2009, 09:30 PM
  #27  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default Traxxas R/C model parts for monster truck arrived rcMart.com!

Traxxas R/C model parts for monster truck arrived rcMart.com!

TRAXXAS R/C model parts for monster truck (REVO, SLAYER, SLASH, TRX 3.3) has just arrived rcMart.com! Please check the list below for your desired Traxxas parts:


For REVO
- Traxxas (#3953) Spur Gear 1.0P 36T For Revo / Slayer
- Traxxas (#3959) Spur Gear, 62-Tooth
- Traxxas (#3961) Spur Gear, 68-Tooth
- Traxxas (#4686) Original Spur Gear (48P 86T)
- Traxxas (#3232X) Super Duty Long Glow Plug For Revo
- Traxxas (#5314) Front & Rear Body Mounts w/Posts & Pins For Revo
- Traxxas (#5330) Front Bulkhead For Revo
- Traxxas (#5340) Aluminum Exhaust Header Silver Anodized For Revo
- Traxxas (#5344X) Heavy Duty Servo Saver Spring For Revo / Slayer

For Slayer
- Traxxas (#3953) Spur Gear 1.0P 36T For Revo / Slayer
- Traxxas (#5344X) Heavy Duty Servo Saver Spring For Revo / Slayer
- Traxxas (#5345X) Steering/Throttle Servo Horns
- Traxxas (#5941) Shock Spring (2.0 rate double black stripe) For Slayer
- Traxxas (#5462) Traxxas GTR Shock Rebuild Kit
- Traxxas (#5465) GTR Shock Caps and Spring Retainers
- Traxxas (#5931) Upper & Lower Suspension Arms (Right Front) For Slayer
- Traxxas (#5932) Upper & Lower Suspension Arms (Left Front) For Slayer
- Traxxas (#5933) Upper & Lower Suspension Arms (Right Rear) For Slayer
- Traxxas (#5934) Upper & Lower Suspension Arms (Left Rear) For Slayer

For Slayer (5908) / REVO (5308)
- Traxxas (#5145) Screw Pin 4×15mm
- Traxxas (#5456) Half Shafts Center For Revo
- Traxxas (#5457) Yoke Brake w/Pins For Revo
- Traxxas (#5458X) Yokes, Differential and Transmission

For EZ-Start
- Traxxas (#5270R) EZ Start 2 Electric Starting System
- Traxxas (#5279) Motor/Pinion Gear/Motor Brush EZ Start 2
- Traxxas (#5211R) Roller Clutch T-Maxx 2.5

For TRX 3.3
- Traxxas (#5224) Connecting Rod (TRX 2.5, 2.5R, 3.3)
- Traxxas (#5291) Wrist Pin/Clips (TRX 3.3)
- Traxxas (#5292) Gaskets Cooling Head (TRX 3.3)

For Slash
- Traxxas (#1918) Alloy Motor Pinion Gear (48P 18T)

where to buy?
http://www.rcmart.com/catalog/hopup-...c-595_739.html
rcmart is offline  
Old 03-15-2009, 09:08 PM
  #28  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default Xray NT18 1/18 4WD Nitro Car On Sale!

Xray NT18 1/18 4WD Nitro Car On Sale!

Xray NT18 1/18 Micro Nitro Car 4WD Shaft Drive



Open box vedio here
http://www.youtube.com/watch?v=jH1lF...4wd-nitro-car/

#380291 Electric Pack inlcuded US$299.90 US$249.90
#380200 Electric Pack NOT included US$249.90 US$199.90


Features : -

With 0.8cc Engine & Muffler
1/18 professional 4WD shaft-drive nitro micro car
High competition micro car with highest performance
Racing characteristics of 1/10 touring cars
Ultra low center-of-gravity (CG)
Maximum drivetrain efficiency
Drivetrain includes 22 ball bearings for maximum efficiency and speed
Fully independent front and rear suspension
Front and rear gear differentials
Adjustable shock position for damping adjustment
Coil-over shocks for precise chassis handling
Adjustable body posts
Uses standard 150mm micro bodies
Uses standard micro wheels and tires
Standard or micro electronics

Specifications

Length: 241mm
Wheelbase: 150mm
Front Width: 98-101mm
Rear Width: 104-107mm
Camber: Preset -1* Front & Rear
Front Toe: Out .5* (Adjustable Option)
Rear Toe: In 4* (Adjustable Option)
Downstops: Adjustable Front & Rear
Ride Height: 3-4mm
Running Weight: Approx 530g
Chassis: Swiss T6 7075 CNC Machined Chassis
Differentials: Gear Type Front & Rear
Ball Bearings: 22
Brake: Laser Cut, Hand Ground
Brake Pads: Ferodo
Drivetrain: 4WD Aluminum Shaft
Shocks: Adjustable Position, Coil Over
Suspension: Independant Double Wishbone
Tires: Pre-Mounted Foam

Xray NT18 0.5cc Engine Specifications

Standard Model Car Fuel
Standard Glow Plugs
Durable Construction
Large, Billet, Blue Anodized aluminum Heatsink
Slide Carburetor w/ Dual Needle
2 Shoe Aluminum Clutch
Polished Muffler
HUDY Steel 23T Clutch Bell

Included : -

Set of foam tires premounted on XRAY micro wheels
1/18 Micro body 150mm
Front foam bumper
BONUS: Hudy 3.0mm screwdriver for kit assembly
NT18 Kit
Engine
Miffler
#380291 - Electric Pack INCLUDED (2xMetal Gear Servo, Receiver Battery Pack)
#380200 - Electric Pack NOT included



Videos!

http://www.youtube.com/watch?v=iMjzK...4wd-nitro-car/
http://www.youtube.com/watch?v=l-hzZ...4wd-nitro-car/
http://www.youtube.com/watch?v=NNLPE...4wd-nitro-car/
http://www.youtube.com/watch?v=DaNC_...4wd-nitro-car/

Where to buy the XRAY NT18?
http://www.rcmart.com/catalog/advanc...WD+Shaft+Drive

Last edited by rcmart; 03-15-2009 at 09:19 PM.
rcmart is offline  
Old 03-15-2009, 09:36 PM
  #29  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default Topcad 1:10 RC Tire Bag on Sale

Topcad 1:10 RC Tire Bag on Sale

Have you ever find your RC tires mess up? Topcad’s Tire bag can help? Made by Nylon, it can keep 1/10 Tire for the width up to 28mm. Five colors available, Blue, Pink, Black, Silver & burgendy. Retail price at US$3.5 & rcmart now has it on discount! Click the links below to get one!

Where to buy this TopCad 1:10 RC Tire Bag?
http://www.rcmart.com/catalog/tire-w...-c-35_775.html
rcmart is offline  
Old 03-17-2009, 01:03 AM
  #30  
Shop Owner
Thread Starter
 
rcmart's Avatar
 
Join Date: May 2004
Location: Hong Kong
Posts: 3,060
Default Traxxas Summit/E-Revo(Brushless) Monster Truck New Arrival!

Traxxas Summit/E-Revo(Brushless) Monster Truck New Arrival!

Traxxas 2009 Brand New Monster Truck, SUMMIT and E-REVO (Brushless Edition) arrived rcMart.com. Stock Limited of this 2 Brand New Traxxas Trucks, be hurry to get them now @ rcMart.com!!


Traxxas (#5610) Summit 1/10 Scale 4WD Extreme Terrain Monster Truck Features:
* Waterproof electronics for running in water, mud, and snow
* EVX-2™ 16.8-volt FWD/REV electronic speed control with patent pending Training Mode™
* Traxxas high-torque Titan® 775 motor
* Traxxas TQ-4™ 27MHz AM transmitter and 4-channel micro receiver
* Innovative T-Lock™ remote locking differentials let you select front and rear locked diffs, front locked diff, or full open differentials via the transmitter
* Transmitter-operated High-Low transmission switches from a 70:1 low-range ratio for climbing torque to a 25:1 high-range ratio for trail speed
* 10-LED lighting system opens the door to night-driving fun
* ExoCage™ body adds real rock-rig style and functional protection
* New 3.8″ Geode™ wheels with beadlock-style sidewall protectors mount securely to aluminum 17mm hex hubs
* Massive 7″ Canyon AT™ extreme-terrain tires with soft inserts generate awesome off-road grip
* Unique chassis design with integrated dual battery compartments
* Quick release battery doors
* Battery cooling vents
* Scalable battery compartments
* Smooth center skid plate shields the driveline
* Sealed receiver box protects the micro receiver from dirt, debris, and moisture
* Dual digital waterproof steering servos deliver a combined 250 oz-in of torque & 0.16-sec transit time
* Hard-anodized, Teflon®-coated shock bodies with TiN coated shock shafts
* Sealed pivot ball suspension
* Sealed limited slip T-Lock™ (remote locking) differentials
* Ball-bearing-supported steering servo system with integrated servo saver
* Hex hardware throughout
* Compatible with many Revo® accessory upgrades
* Traxxas innovation built in!
* Ready-To-Drive®

Traxxas (#5608) E_REVO 1/10 Scale 4WD Brushless Monster Truck Features:
* Castle Creations Mamba Monster ESC
* Castle Creations Mamba Monster 2200KV Motor
* Traxxas TQ 2.4GHz Radio
* Brushless transmission with metal center idler gear
* Heavy-duty 17mm splined aluminum hex hubs and wheel nuts
* Unique chassis design with integrated dual battery compartments
* Quick release battery doors
* Battery cooling vents
* Scalable battery compartments from sport packs to brutal 6S LiPo power
* Smooth center skid plate shields the driveline
* Sealed receiver box protects the micro receiver from dirt, debris and moisture
* Dual digital waterproof steering servos deliver 125 oz-in of torque & 0.16-sec transit time
* Hard-anodized Teflon®-coated shock bodies with TiN coated shock shafts
* Sealed pivot ball suspension
* Sealed limited slip differentials
* Dual-servo steering system
* Hex hardware throughout
* 3.8” black chrome Gemini™ wheels
* 3.8” Talon™ tires
* Sleek pre-painted body design
* Adjustable rear wing
* Compatible with many Revo® Platinum upgrades
* Traxxas innovation built in!
* Ready-To-Race®

Where to buy?
http://www.rcmart.com/catalog/kits-t...id=312&sort=1a
rcmart is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.