Pocket rocket - collection of tiny FPV racing drone
#16
#17

Nice micro collection you got there, I love your FuriBee F36 and was planning to get one since my Eachine QX70 seems to be loud and flexy. What the flight time you got on F36?
#18

Article review for Q100
Here my thought, opinion and review on my King Kong Q100 micro FPV racer
Article: http://www.supermotoxl.com/designs-a...v-racing-drone
Here my thought, opinion and review on my King Kong Q100 micro FPV racer
Article: http://www.supermotoxl.com/designs-a...v-racing-drone

#19

Thanks! The F36 is a lot of fun. I get about 3 and a half minutes with 4 blade props, but it should improve almost a minute as soon as I cut some down to 2 blades.
#20

Nice review of the Q100. I've been looking at that frame for a future build. I will probably get started on it once I finish the Bee-90.
#21

Micro-FPV a little thing but much of fun 
My build
Micro FPV
YouTube >> https://www.youtube.com/watch?v=5YY5LMB18i4

My build

YouTube >> https://www.youtube.com/watch?v=5YY5LMB18i4
+ YouTube Video | |
#22
#23
#24
#25

Not actually pocket racer size but it does related to same flight firmware branches such as CLEANFLIGHT and BETAFLIGHT, the iNAV.
Trying out new open source iNAV flight program that turns cheap drone racing flight controller into GPS capable autopilot flight. Using same flight controller use on micro racer but added tiny GPS. Tested on 250 quadcopter (DIATONE 250 frame). I did tune the PID properly yet close to stock setup yet it flew well. Cheers to iNAV developer.
Video:
https://www.youtube.com/watch?v=IABA90i2-Is
Trying out new open source iNAV flight program that turns cheap drone racing flight controller into GPS capable autopilot flight. Using same flight controller use on micro racer but added tiny GPS. Tested on 250 quadcopter (DIATONE 250 frame). I did tune the PID properly yet close to stock setup yet it flew well. Cheers to iNAV developer.

Video:
+ YouTube Video | |
https://www.youtube.com/watch?v=IABA90i2-Is
#26

That is pretty cool!
#27

For those interested building a compact foldable drone smaller than DJI MAVIC using DIY parts you can download my 3d printed design the "XL-RCM 28.0 XPANDER. You can download it for free at my webpage here: https://www.supermotoxl.com/real-object-des...pv-racing-drone
It contain many parts to print and overall it 180mm rotor to rotor size, parts recommended and compatible are listed at the webpage as well. Enjoy printing.
Download: https://www.supermotoxl.com/real-obj...v-racing-drone
Photos:













It contain many parts to print and overall it 180mm rotor to rotor size, parts recommended and compatible are listed at the webpage as well. Enjoy printing.
Download: https://www.supermotoxl.com/real-obj...v-racing-drone
Photos:














Last edited by xl-racing; 09-10-2017 at 08:00 AM.
#28

Sharing video enjoy flying my cheapo King kong Q100 micro FPV racer around the park zooming around trees, ditch, douggie and stuff yesterday. Fun before having some lunch.
Video:
https://www.youtube.com/watch?v=YhTbYbuW8KI
.
Video:
+ YouTube Video | |
https://www.youtube.com/watch?v=YhTbYbuW8KI
.
#29

Back touring and speeding around big park with lots of obstacles to play around with my tiny pocket rocket FPV Q100.
Video:
https://www.youtube.com/watch?v=c7sSUbZRJJg
Video:
https://www.youtube.com/watch?v=c7sSUbZRJJg
+ YouTube Video | |
#30