R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   RC Boating (https://www.rctech.net/forum/rc-boating-142/)
-   -   Black Jack bl 26 - crash on film (https://www.rctech.net/forum/rc-boating/831523-black-jack-bl-26-crash-film.html)

sd2649 08-19-2014 05:28 PM

Black Jack bl 26 - crash on film
 
So, I've seen people talk about how fragile the 26" body is, in just happened to crash mine head long into a concrete pole at full speed... yeah... and caught it on video. I'm running it without the turn fins and on dual 9.6v 5000may batteries, so at 19.2v, it was booking it. I think the boat ended up pretty well considering! Here is the video, the crash is at 1:33, carnage is revealed at the end:

Oops! Can't post a link, can someone else post it? Search YouTube for "Stock PB BJ26 19.2v - Full Speed Crash"

It's posted by Steven Donald

spookie 08-19-2014 05:55 PM

Oh man I jumped when it hit lol. 1:35 in, I just cringed lol. :nod:
https://www.youtube.com/watch?v=nhYJtiHH4x8
+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

sd2649 08-19-2014 06:00 PM

Man!
 
Thanks for putting up the link!

I felt like an idiot! I'm new to boats, been into planes for a while and for some reason had never had to worry about a crash with the boats before, other than the coast. I even had the darn thing centered in the camera but didn't even pay attention to it! I really did tape the boat up and drive it again just fine a couple minutes later. I plan on getting some fresh fiberglass on it soon!

Pintobean11 08-20-2014 10:06 AM

If you hit it straight on it would have been much worse. I hit a bouy with my Impulse and it hit so hard it completely turned off. I had to swim out and get it.

https://www.youtube.com/watch?v=Urf3b33OidM

roadrashracing2 08-20-2014 04:46 PM

way to keep it clean in front of the kids, I would have said all kinds of words lol.

Southpaw477 08-20-2014 10:13 PM

OUCH!!!

sd2649 08-21-2014 01:28 PM

Yeah, I'm lucky it hit from the outside. I'm glad it made it to shore or I would have had to fish it in with my trusty recovery fishing pole, lol! After I taped it up, I had another couple runs and then spun it backwards at high speed, the solder on the u joint to the drive flex cable got spun/disconnected and it was just floating away. The fishing pole with some lead weights and a couple bobbers got it in fine. I think the solder on the shaft might have been loosened by the previous crash, but who knows???

asc6000 08-21-2014 01:42 PM

You need
MORE POWER
GO FASTER

sd2649 08-22-2014 07:33 AM

Never fast enough! I have a mystery esc and two 3s 2650mah packs that I am scared to try on this boat. It's going to scream!

semijoe 09-15-2014 06:25 AM

well that abouts sucks,

Jeepy2013 09-15-2014 07:55 AM

OOPS!


All times are GMT -7. It is currently 04:34 PM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.