R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Futaba (https://www.rctech.net/forum/radio-electronics/999311-futaba.html)

LuckyMcNever

10-03-2017 04:57 AM

Futaba

I have a Futaba 3Pv and a R203gf reciever. I cant get them to bind. The LED light never comes on. I thought i got a bad reciever so i bought another one. Same thing is happening. Is there something I'm missing?

MarkA

10-03-2017 08:35 AM

Make sure the TX has been switched to S-FHSS mode, and turned off and back on and once that has been done, then try to bind.

jkaetz

10-04-2017 09:29 AM

Quote:

Originally Posted by LuckyMcNever (Post 15044186)

No LED means no signal. Blinking green LED means it is receiving signals but isn't bound with that transmitter. Holding the bind/link button should initiate a connection and the LED will be solid green. Your transmitter likely isn't set to S-Fhss.

rcoldtimer

10-06-2017 06:16 AM

Another Fubata 3pv

When I am at the led screen trying to get my setting correct the darn thing is telling me channel is turned off. How did I do that and how do I correct it. I guess I did HELP......

rcoldtimer

10-06-2017 06:17 AM

I meant channel 2

MarkA

10-06-2017 08:23 AM

Quote:

Originally Posted by rcoldtimer (Post 15046542)

When I am at the led screen trying to get my setting correct the darn thing is telling me channel is turned off. How did I do that and how do I correct it. I guess I did HELP......

Try a model reset and start over - P15 of the manual will tell you how.

rcoldtimer

10-06-2017 06:41 PM

Yea Mark, that's what I did. Went to the reset and started over. Just didn't understand what was going on. Thanks man.....

All times are GMT -7. It is currently 07:37 PM.