Muchmore Fleta SHR Program Card - Problem?
 

Hey guys,

I just finished wiring some new fleta pro v2 esc's into my cars but can't seem to get the program card to work. Tried searching on here and google but couldnt find anything related to my issue.

When I plug it in the screen comes on but if I try to scroll I'm not able to. It just stays on the welcome screen.
I made sure its plugged in correctly (pos/pos, neg/neg) but no luck. Also tried both cars, same result.

Any ideas?

Try to reflash with the newest firmware.

Update bothe the esc and the card to the newest firmware. The card should have the v1.7 firmware

Thanks for the suggestions!
When I looked for firmware for the card, it said upcoming.
FLETA Super High Response Program Card

Maybe I can get the firmware through the pc program? I haven't been able to install the program yet because I have a mac.

I have installed the newest firmware through the pc suite

Thanks, I'll try that

So I got the card updated with the program on my computer, but only had 2 options to choose from on card (when I plugged it into the esc). Not sure what I'm missing.
It seems as though I need to hook up the card to the esc and computer at the same time to download settings to it, and then adjust with the card thereafter?

Sorry if this has been discussed before, but using this esc/card is a new thing to me. I'm use to just pressing the little button and waiting for flashing lights :D

Read step by step manual on the Muchmore webpage. There is step by step instruction - http://www.muchmoreracing.net/suppor...N1cHBvcnQucGhw