R/C Tech Forums - Multi ESC testing

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Multi ESC testing (https://www.rctech.net/forum/radio-electronics/979875-multi-esc-testing.html)

Matt Campbell

02-27-2017 07:40 PM

Multi ESC testing

Hi all... I hope someone could help with a small enquiry..

I have a project which would require running 5 ESC's at the same speed...

Is it ok to hard-wire one 3ch servo tester to drive 5 ESC's for the purpose of short term testing????

If not, what are my options????

Thanking you in advance of any information..
Matt:confused:

robert@castle

02-28-2017 06:47 AM

If they have internal BEC's, remove the red wire from the plug that is going into the servo tester on all but 1 of the ESC's. Hooking all of the red wires up together with a BEC on each one can damage an ESC.

Other than that, there is no issue running 5 ESC's in parallel.

All times are GMT -7. It is currently 04:37 AM.