'Orion R10.1 pro with 4 pole motor' Query
Hi everyone,
This is my first time posting in any RC forum. I have managed to get my hands on a new Orion R10.1 Pro. My plan is to use this ESC with a 4 pole motor, however based on research that I have done by viewing various threads, it turns out that this ESC has to be updated in order to accomodate 4 pole motors. If this is true, I was wondering if anyone could suggest to me as to which update is required to successfully run this esc with a 4 pole motor ( which is a MAMBA MAX 5700kv motor). I was also wondering if anyone could upload or send me these update files for the ESC( I am having real difficulty with Team orion's website) . Your help and suggestions will be much appreciated. |
The older R10 had some issues sometimes with some 4-pole motors; the 10.1 should be good to go with a 540-sized 4-pole out of the box although if your motor is sensorless, you will lose much of the smoothness/reason to have an Orion R10.1 anyway.
|
Originally Posted by TechDude
(Post 14788820)
Hi everyone,
This is my first time posting in any RC forum. I have managed to get my hands on a new Orion R10.1 Pro. My plan is to use this ESC with a 4 pole motor, however based on research that I have done by viewing various threads, it turns out that this ESC has to be updated in order to accomodate 4 pole motors. If this is true, I was wondering if anyone could suggest to me as to which update is required to successfully run this esc with a 4 pole motor ( which is a MAMBA MAX 5700kv motor). I was also wondering if anyone could upload or send me these update files for the ESC( I am having real difficulty with Team orion's website) . Your help and suggestions will be much appreciated. |
All times are GMT -7. It is currently 09:42 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.