R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   having a problem linking futaba (https://www.rctech.net/forum/radio-electronics/860123-having-problem-linking-futaba.html)

jnelson214 01-30-2015 07:52 PM
having a problem linking futaba
 
Futaba 4PL and futaba R2004GF. They wont link. Has anyone had this issue? I chatted with a guy at AMain and he said they should be able to work but under their description for the R2004GF it doesnt say compatible with 4PL? Any help would be appreciated. They both are FHSS not FAST.

Thanks

GerryH 01-30-2015 08:25 PM
That receiver is compatible. But it's only FHSS not S-FHSS. You might need to set the model to FH mode by going into the model memory and changing the mode. Remember you have to turn the transmitter off and on for it to actually change modes.

Then you should be able to bind the receiver with the normal procedure.

This is from my 4PLS manual:
When a dedicated FHSS receiver (R603GF/R2004GF) is used, it will not operate if the RX type is not set to "FHSS".

jnelson214 01-31-2015 12:54 PM
Originally Posted by GerryH (Post 13817619)
That receiver is compatible. But it's only FHSS not S-FHSS. You might need to set the model to FH mode by going into the model memory and changing the mode. Remember you have to turn the transmitter off and on for it to actually change modes.

Then you should be able to bind the receiver with the normal procedure.

This is from my 4PLS manual:
When a dedicated FHSS receiver (R603GF/R2004GF) is used, it will not operate if the RX type is not set to "FHSS".
Thank you... very helpfull.


All times are GMT -7. It is currently 10:22 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.