BUGGY SERVO SPECS
 

HOW MANY OZ IN OF TORQUE SHOULD A STEERING SERVO IN AN 1/8 BUGGY HAVE?? SO MANY OF THE REALLY FAST SERVOS HAVE ONLY 200-225 ....I'M THINKING THIS IS MORE THAN ENOUGH FOR A BUGGY..BUT IN A PERFECT WORLD NOT SURE HOW MUCH YOU NEED IN A BUGGY....TRUGGY I ALWAYS FIGURE IF I HAVE 300 OR OVER I'M GOOD...WHICH EVEN THAT MUCH ISN'T PROBABLY NECESSARY

You're on the right track in terms of required torque for 1/8th buggy and truggy, but do everyone a favour and turn off your Caps Lock.

Yes agreed with previous post. Torque values are good for both cars. Speedwise, 0.08 and 0.11 are good enough values. There are some servos which are both very fast and they have high torque values.

Savox 2274 0.08/60degree, 350 oz in torque, 92usd
Futaba sv9352 0.06/60degree, 300 oz in torque, 149usd
Radiopost signature series: 0.07/60degree, 459 oz in torque , 139usd.