Lipo Question - Connectors
 

This might be a dumb question but I got a receiver and a pair of high voltage servos and was planning on pairing them with a 2S lipo without a regulator. Question is what type of extension do I need to go from the receiver (Sanwa) to the lipo battery pack. The lipo pack as the Red connector but my I only find standard three pin extensions. I hope I am making sense. Can the red lipo plug fit a standard three plug female connector.

you will need to rewire the lipo battery with the standard receive plug if it already doesn't have one, which it should.

https://www.spektrumrc.com/ProdInfo/...2000LP-450.jpg

the lipo battery should have the black plug on it, or you will need to wire one on.

Same type of plug as shown on this battery holder?

http://www.rcdude.com/servlet/the-11...r--dsh-/Detail

I'll say it SHOULD fit into a female extension, the same as it would into a receiver.

I'm not sure I've ever seen a lipo receiver pack with anything but a 3 pin connector though.