DSM DSM2
 

I think I may have just made an expensive ( I know relative)
mistake...

I bought from a member 3 LOSI branded Sprektrum TXs
and I have bought 6 Spektrum SR301s rxs

I think that the TXs are DSM and the RXs are DSM2 and wont bind...
seeing that I am new, can someone set me straight.

What other TXs can I use with the SR300s?


Thanks for your time

Fritz

The SR300 is a DSM rx, as is the SR301. You should be able to bind the Losi TX to both of those.

My Mistake...
I seem to be making many newbish ones



The Receivers I have are the SR3000 and I believe are DSM2 and the Losi transmitters wont bind to them...
THe transmitters stop flashing in Bnd mode, but the receivers wont

Are theer any compatible receivers for these trransmitters?

Thanks again
Sorry to keep confusing meself and others
Fritz

The SR3000 is DSM, the SR3100 is DSM2.

Use this as a reference: https://www.spektrumrc.com/Products/ReceiverGuide.aspx

AreCee
thanks for that link
I will have to look at the receivers one more time...
I was tryitg to post from memory...
you can do that, if you know what you are talking about and know what you have...
I dont


Thanks,.

Fritz

I am sure if they are DSM2, then someone will obviously trade with you.

You can pick up the DSM2 DX2E that comes with the current RTR cars on ebay for $20 - $30 and it will bind with DSM2 or DSM receivers. You have to get the black one with antenna that looks like a shark fin, but you can do it on the cheap and if you upgrade to a nicer radio later sell it for near what you had in it.