R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   upgrading servo ?? (https://www.rctech.net/forum/radio-electronics/799325-upgrading-servo.html)

GRIMREAPER 03-11-2014 01:20 AM
upgrading servo ??
 
Im looking to get a better servo for my losi 8ight t right now i have a hitec hs 5645mg. it feels a bit to slow at 6.0v. i had a savox sc1258tg in it when i got the truck that worked for awhile. looking for something wit enough speed and toque

dan_vector 03-11-2014 04:01 AM
Something like the sanwa ERS-961 or 962 would be perfect. I've heard good things about the high end hitec's too.

King DORK 03-11-2014 01:56 PM
Radiopost red

GRIMREAPER 03-11-2014 03:40 PM
Originally Posted by King DORK (Post 13087571)
Radiopost red
who sell these i never herd of them

ThePanda 03-11-2014 04:50 PM
Originally Posted by GRIMREAPER (Post 13087867)
who sell these i never herd of them
radiopost sells them. they are on ebay. about 130. Otherwise i would say go with a KO PROPO servo, have ward lots of good things about them, plus their rsx and bsx one look sweet.

King DORK 03-11-2014 06:02 PM
Originally Posted by GRIMREAPER (Post 13087867)
who sell these i never herd of them
http://www.stormerhobbies.com/cgi-bi...&pn=RPIRP3009M
They're crazy awesome servos for the money. Very quiet, smooth, and precise servos.

Yosh70 03-11-2014 07:09 PM
You have a pretty weak servo for a 1/8th scale truggy in terms of torque.....I run a Savox SC1256TG (277 oz/in @ 6.0V) in my Losi but thinking of a SB2250SG (347 oz/in @ 6.0V) for my next one. Another one is a Hitec HS7955TG which is a proven monster servo that I don't think you can wrong with.

tristyn 03-14-2014 10:10 AM
servo
 
Originally Posted by Yosh70 (Post 13088586)
You have a pretty weak servo for a 1/8th scale truggy in terms of torque.....I run a Savox SC1256TG (277 oz/in @ 6.0V) in my Losi but thinking of a SB2250SG (347 oz/in @ 6.0V) for my next one. Another one is a Hitec HS7955TG which is a proven monster servo that I don't think you can wrong with.
+ 1 on the Hitec 7955. Install & never look back

GRIMREAPER 03-14-2014 11:26 AM
What's a good waterproof servo

dan_vector 03-14-2014 11:38 AM
Originally Posted by GRIMREAPER (Post 13096750)
What's a good waterproof servo
All the Sanwa ERS series servos are waterproof such as the ERS-961 or ERS-962. They are bullet proof as well!

GRIMREAPER 03-19-2014 01:40 AM
Would I have to install a bec with the sanwa or the hitec.

dnuggett 03-19-2014 10:04 PM
Originally Posted by GRIMREAPER (Post 13110336)
Would I have to install a bec with the sanwa or the hitec.
I can't speak for the sanwa but for the Hitec, no at least not with Futaba RX.


All times are GMT -7. It is currently 06:27 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.