R/C Tech Forums - Tx stopped working ?

Page 2 of 2

Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Tx stopped working ? (https://www.rctech.net/forum/radio-electronics/781274-tx-stopped-working.html)

Wallee

12-29-2013 08:18 AM

Well I have a extra servo on another model I will borrow and then I will know for sure if it's out.

ThePanda

12-29-2013 11:27 AM

Quote:

Originally Posted by theblitzkidd (Post 12852577)

Most of the time the amplifier in the servo will go if it takes a current the wrong way, such as pluging in backwards

if you plug a servo in backwards, i don't believe it should be receiving any current at all, due to the plug arrangement.

Wallee

12-29-2013 10:33 PM

Put in a throttle servo off another model and checked and it worked so looks like my steering servo went out, I was using a savox 0254 can anyone recommend something better?

rok55

12-29-2013 10:48 PM

Have you tried it with a different steering servo, that's the only way to be %100 sure

ThePanda

12-29-2013 11:13 PM

Quote:

Originally Posted by rok55 (Post 12855294)

Have you tried it with a different steering servo, that's the only way to be %100 sure

thats what he was saying he was doing.

ThePanda

12-29-2013 11:16 PM

Quote:

Originally Posted by Wallee (Post 12855275)

Put in a throttle servo off another model and checked and it worked so looks like my steering servo went out, I was using a savox 0254 can anyone recommend something better?

http://www.amainhobbies.com/product_...tal-Gear-Servo

this seems to be pretty good. I think that around 200 oz/in is a minimum for steering you should want.

Wallee

12-29-2013 11:53 PM

Quote:

Originally Posted by ThePanda (Post 12855347)

http://www.amainhobbies.com/product_...tal-Gear-Servo

this seems to be pretty good. I think that around 200 oz/in is a minimum for steering you should want.

I will probably get this one, seems like a decent price too

All times are GMT -7. It is currently 11:53 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page