brushlees hobbies lt4 120a problem
 

hi there i have a question my esc a 120a lt4 well i feel like my lvc is not kicking in theres no beeps no flashes nothing after a 7minute use of the lipo my throtltle goes to like half and then if i like let go and push it again full throttle it goes all of a sudden to fulll power again then to half power any help needed

That is your low voltage detection working.

That is correct. Have you checked to see what your low voltage cutoff is set at? for 2Cell it should be 3.0 or 3.2 per cell(6-6.4V total).

This is built into the esc to tell you it's time to stop running before you over discharge your battery and possibly damage it.

The LT4 comes with a USB connector and you can download the software for free to update and check your settings.

thank you for the help you guys