R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   Spektrum dx3c problem (https://www.rctech.net/forum/radio-electronics/779891-spektrum-dx3c-problem.html)

nitram 12-20-2013 11:56 PM

Spektrum dx3c problem
 
I have problem's with my Spektrum Dx3c

It just started going bad. After turning on the transmitter, I turn the car on, and the car wheels just start turning about at 60% of their speed. Impossible to stop the wheels, even with the brake fully on.

I reset everything, still happens. Bind the transmitter to other cars, does the same. But if a bind my car to my old losi spektrum transmitter, everything is fine.

Please help me to find the problem and to solve it

Thanks

Jerm13 12-21-2013 06:21 PM


Originally Posted by nitram (Post 12831283)
I have problem's with my Spektrum Dx3c

It just started going bad. After turning on the transmitter, I turn the car on, and the car wheels just start turning about at 60% of their speed. Impossible to stop the wheels, even with the brake fully on.

I reset everything, still happens. Bind the transmitter to other cars, does the same. But if a bind my car to my old losi spektrum transmitter, everything is fine.

Please help me to find the problem and to solve it

Thanks

Sounds like your throttle trim got moved. Center everything out and re-bind. See what happens. Don't forget to check the sub trim too.

nitram 12-28-2013 03:38 AM

All the trims and sub trims were verified more than once.
I' ve called Horizon service and there is probably an internal problem, a glitch inside the controller. No other choice than to send it...

But shipping plus repair cost will be quite expensive.. 40$/hour

So i will probably buy another one, like that it will be guranteed and I will have a new receiver too.


All times are GMT -7. It is currently 02:15 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.