Intermittent Savox SC-1258TG
 

Hey guys,

Just purchased one of these Savox SC-1258TG
and whenever I turn L and R really fast, while the car is on the stand, the receiver loses connection and the servo stops and cogs a little bit. Seconds later the connection to the TX is solid again.

This only happens when I turn the TX back and forth really fast, at slow speeds the issue does not arise.

I'm guessing it may have something to do with inadequate voltage being supplied to the servo?

Also, My HiTec HS5625MG works flawlessly on the exact same car and setup.

Any help would be great!

It's the servo. You really need an external bec or a glitch buster cap.

What sort of BEC would go along with that servo and a Novak Havoc Pro SC X drive?

Better question, can I use any cap? Obviously one rated the same as the glitch buster cap

Should be able to. Basically It's the same, the glitchbudster is just prewired.

I use the premade novak glich buster and I solved that same problem.