|
Originally Posted by Randy_Pike
(Post 12285829)
Are you in their version of sensored only mode?
What car? Gearing? Battery? |
I like 2 layers of the parma servo tape, it's the thick clear stuff. It helps prolong the magic.
|
Originally Posted by mydudrevo
(Post 12286044)
Smart sense. Caster rapture and I tried 16-13t pinion on 46t spur. Smc race formula 6500 70c. Motor is running great no heat problems at all. I have the punch on 20% and I'm running an external bec.
|
Ya a friend is loaning me a HW150 to see if that helps and if it does I might get a rx8g2. How is the bec in the rx8?
|
It's awesome. 6v or 8v and 7 amps.
|
Great I hate having an external bec and all the extra wiring just looks messy
|
Originally Posted by kcasner
(Post 12286008)
Mine blew up too. Going to give them a call today, hopefully this isn't a wide spread problem.
Worked great for 5min's on 11.1v, but then I changed over to my series adapter for 22.2v... Before I could unplug it, huge white/yellow cloud of smoke, and the side of the case melted. Not sure if this has anything to do with it, but it was updated to the latest 238 firmware. https://lh6.googleusercontent.com/-f...621_160544.jpg https://lh5.googleusercontent.com/-r...621_160723.jpg https://lh4.googleusercontent.com/-7...621_160555.jpg Dude! As a a serious safety precaution, i would suggest putting heat sinks over the soldered ends of all your Deans Plugs. Just a safety measure. |
Originally Posted by kcasner
(Post 12286008)
Mine blew up too. Going to give them a call today, hopefully this isn't a wide spread problem.
Worked great for 5min's on 11.1v, but then I changed over to my series adapter for 22.2v... Before I could unplug it, huge white/yellow cloud of smoke, and the side of the case melted. Not sure if this has anything to do with it, but it was updated to the latest 238 firmware. |
Originally Posted by HBRC-LBD
(Post 12286009)
Hey guys,
Can someone tell me if the current limiter effects the top speed? Cheers Kev No it does not, only acceleration. That's the beauty of it! |
I must say that the gen2 has to be the sexiest esc on the market so I think I'm gonna have to have one
|
Originally Posted by mydudrevo
(Post 12286044)
Smart sense. Caster rapture and I tried 16-13t pinion on 46t spur. Smc race formula 6500 70c. Motor is running great no heat problems at all. I have the punch on 20% and I'm running an external bec.
|
Ya I have castle link ill give that a shot.
|
Hi Randy a couple of questions for you , i just received the RX8 gen2 esc , im going to run it on my Associated 1/8 truggy this is my set up , motor thats in it right now T8 1550 kv , 15 pinion , 5s 40 c 5000 mah lipo , my question is do i need to program the esc at all or can i run it with the factory settings as is ?
|
Originally Posted by mydudrevo
(Post 12286561)
Ya I have castle link ill give that a shot.
|
Originally Posted by mavdriver
(Post 12286567)
Hi Randy a couple of questions for you , i just received the RX8 gen2 esc , im going to run it on my Associated 1/8 truggy this is my set up , motor thats in it right now T8 1550 kv , 15 pinion , 5s 40 c 5000 mah lipo , my question is do i need to program the esc at all or can i run it with the factory settings as is ?
|
| All times are GMT -7. It is currently 03:09 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.