R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   HOBBYWING MOTOR TAB ISSUES? (https://www.rctech.net/forum/radio-electronics/714482-hobbywing-motor-tab-issues.html)

twisted 03-18-2013 09:21 PM
HOBBYWING MOTOR TAB ISSUES?
 
i just bought a hobby wing combo and iam a little leery about how the motor wires solder to the motor.

ill be using mine in a buggy.

has anyone had any issues with them? heres a link to a pic.

http://www.rcmart.com/images/hobbywi....5T-Blue-1.jpg

Hoese37 03-19-2013 12:33 AM
Thats the same type of post on a tekin esc.

Shiloh 03-19-2013 10:18 AM
The HobbyWing motor posts are just soldered in. Heat them up and remove the posts from the motor tab. Then stick the motor wires through the holes and solder the wires into place. That is how I always run HobbyWing motors. I don't use their solder posts on the motor.

cdwilliams1 03-19-2013 12:23 PM
Originally Posted by Shiloh (Post 11948487)
The HobbyWing motor posts are just soldered in. Heat them up and remove the posts from the motor tab. Then stick the motor wires through the holes and solder the wires into place. That is how I always run HobbyWing motors. I don't use their solder posts on the motor.
I second that. I do exactly the same thing on my Hobbywing Xerun 17.5

twisted 03-19-2013 01:28 PM
Originally Posted by Shiloh (Post 11948487)
The HobbyWing motor posts are just soldered in. Heat them up and remove the posts from the motor tab. Then stick the motor wires through the holes and solder the wires into place. That is how I always run HobbyWing motors. I don't use their solder posts on the motor.
thanks !


All times are GMT -7. It is currently 01:05 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.