Which Servo Is Better?
 

Hello everyone. Im needing some help with some of my steering servos. Which servo should I use in my 1/8 brushlesss converted Mugen MBX5. The servos available are listed below:

* JR Z650M - High Torque Servo: Metal Gear

Basic Information
Analog
Modulation:
4.8V: 123.0 oz-in (8.86 kg-cm)

Torque:
6.0V: 142.0 oz-in (10.23 kg-cm)
4.8V: 0.20 sec/60°

Speed:
6.0V: 0.17 sec/60°
1.60 oz (45.4 g)

Modulation: Analog

Torque: 4.8V: 115.0 oz-in (8.28 kg-cm) 6.0V: 144.0 oz-in (10.37 kg-cm)

Speed: 4.8V: 0.23 sec/60° 6.0V: 0.18 sec/60°

Weight: 2.36 oz (67.0 g)

Dimensions: 1.54 in (39.1 mm) 0.79 in (20.1 mm) 1.61 in (40.9 mm)

Modulation: Analog

Torque: 4.8V: 115.0 oz-in (8.28 kg-cm)
6..0V: 144.0 oz-in (10.37 kg-cm)

Speed: 4.8V: 0.23 sec/60° 6.0V: 0.18 sec/60°

Weight: 2.36 oz (67.0 g)

Dimensions: 1.54 in (39.1 mm) 0.79 in (20.1 mm) 1.61 in (40.9 mm)

Motor Type: 3-pole

Gear Type: Metal


If your interested in buying it nor trading then let know what you have... an either PM me or email me at
: [email protected]

Thanks






Rotation/Support: Dual Bearings
Single Bearing
et Price: 49.99 USD