Should I try this new servo?
 

I recently heard one servo called Fitec,one letter difference name with Hitec
How is the servo used,is there anyone know or test?
They send me their new programmable servo specification,looks awesome,I am wondering should i try some samples.

Fi8612M:
Size: 40.0*20.0*37.5 mm
Weight: 73g(2.58oz)
Speed: 0.12sec/60°(6V)
0.09sec/60°(7.4V)
Torque: 10.2kg.cm/141. oz.in(6V)
12.8kg.cm/178.1 oz.in( 7.4V )
Application:1/10Car, Boat, Robot

Fi8622M:
Size: 40.0*20.0*37.5 mm
Weight: 73g(2.58oz)
Speed: 0.17sec/60°(6V)
0.15sec/60°(7.4V)
Torque: 18.9kg.cm/262.9 oz.in(6V)
21.3kg.cm/296.3 oz.in( 7.4V )
Application:1/10 1/8 Car, Boat, Robot

-Standard digital metal gears servo、2BB
-Corless moter
-All Aluminum alloy case
-Waterproof
-Operating Voltage:6~7.4Volts
-Interface: (like JR)
-Wire length: 30cm

Servo programmable function
1. FAIL SAFE, On or Off
2. Direction of Rotation
3. Travel Speed
4. Servo Max Torque limit, and Punch
5. Center, End, and FAIL SAFE Point
6. Signal Pulse Set-Up
7. Stretch (Holding Power, Running Power, Acceleration and Deceleration)
8. Dead Band Width
9. Resolution Setup
10.“Save and Open” File Options
11. Reset Factory Default Data
12.Read and Write Servo Data

Should i try the new servo from this copy name company products?
However, it is very interesting to me