ORCA Team - VRITRA VX COMPETITON ESC
#398
The Orca thread in Team discussions has some good ones. But your right, not much other info out there right now, but these setting are good.
I use Andrew's setup on asphalt and plan on using it on carpet once season starts again. I use different brake settings though
Here are Andrew's settings for Mod (5.5 ORCA TX Motor)
1,25%
2,19%
3,normal
4,0.05
5,27*
6,-2
7,4%
8,4%
9,4k
10,6
11,8K
I use Eric's for stock, and again, different brake settings.
Punch 10
PWM 4K
BPWM 1K
Initial brake 5
Drag brake 3
Neutral width 5%
EA
#399
Tech Regular
iTrader: (1)
The Orca thread in Team discussions has some good ones. But your right, not much other info out there right now, but these setting are good.
I use Andrew's setup on asphalt and plan on using it on carpet once season starts again. I use different brake settings though
Here are Andrew's settings for Mod (5.5 ORCA TX Motor)
1,25%
2,19%
3,normal
4,0.05
5,27*
6,-2
7,4%
8,4%
9,4k
10,6
11,8K
I use Eric's for stock, and again, different brake settings.
Punch 10
PWM 4K
BPWM 1K
Initial brake 5
Drag brake 3
Neutral width 5%
EA
I use Andrew's setup on asphalt and plan on using it on carpet once season starts again. I use different brake settings though
Here are Andrew's settings for Mod (5.5 ORCA TX Motor)
1,25%
2,19%
3,normal
4,0.05
5,27*
6,-2
7,4%
8,4%
9,4k
10,6
11,8K
I use Eric's for stock, and again, different brake settings.
Punch 10
PWM 4K
BPWM 1K
Initial brake 5
Drag brake 3
Neutral width 5%
EA
Timing start---- 30%
Timing ---------- 14
Timing Interval--- +3
Turbo delay-----------0.02
Turbo Timing---------30
Turbo Interval--------+3
Punch-------6
pwm---------32K
Brake freq-----2K
Neutral range------7%
Overheat protection-------off
#404
Tech Fanatic
iTrader: (18)
I know that there are 3 of us using these settings running anywhere from a 4.5(me), a 5.5 and a 6.5.
Using these speedo settings, it really numbs down the bottom end...making the car easy to drive through the infeild and still having the big speed on the straights.
I have been running a 9.0 gear ratio just to keep from being overwhelmed and to also take a bit more of that bottom end out.
All credit for these settings, by the way, should go to Mike Hanulec. He has (strangely) been the voice of reason for us guys running mod this year...