MT4 binding issues
 

trying to bind my airtronics mt4, but the throttle is not active. i see the lights on the esc react when throttle is pushed but no action.


it sometimes comes on 5-10 minutes later. the fan on the esc stays on.

thanks for the help.

After binding the receiver to the transmitter you have to calibrate the ESC to the radio. Have you done so?

how can i calibrate esc to throttle if the throttle wont even activate?

thank you for your help

You said yourself that you see the lights change on the esc when you move the throttle. So, you should recalibrate your esc to the transmitter like dtr said.

Check the manual of your ESC, the calibration procedure is described there.

thanks very much guys! it worked!! thanks again!