R/C Tech Forums - Hitec 7955 servo question

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Hitec 7955 servo question (https://www.rctech.net/forum/radio-electronics/626896-hitec-7955-servo-question.html)

guss2009

05-08-2012 08:17 PM

Hitec 7955 servo question

I have 2 Hitec 7955 servos on my losi buggy and have a regulator connected. I thinking of using the servos without the regulator. Will i have a problem if i take it off? Will the lpo burn my servo or receiver? Ill be using a losi 2000mah lipo battery and the receiver is the spektrum sr3100.

cdc	05-08-2012 08:50 PM

Hitec 7955 and spektrum sr3100 work fine with lipo unregulated.

AreCee

05-09-2012 11:33 AM

Quote:

Originally Posted by cdc (Post 10709718)

Hitec 7955 and spektrum sr3100 work fine with lipo unregulated.

The receiver is rated to 9.6V but Hitec only rates the 7955 to 6V. I know several people that do run their 7955s at 7.4 regulated volts (with a CC BEC) but a fully charged lipo is 8.4V. So if you do go unregulated the receiver is fine, I'm not too sure about the servos.

All times are GMT -7. It is currently 08:29 AM.