Hobbywing Xerun V3
#361
#362
Dbl post?
#363
http://roarracing.org/4rmb/showthrea...ck-30401020037
Motors listed you can find more winds on the same forum
Motors listed you can find more winds on the same forum
#364
Where do you find v3 508?
I have a v3.1 and the only software versions i can see are 129_beta, 526_beta and 918_beta.
USB software is v3.4, LCD is V1.11_120331_V3
Im using a reedy 13.5 in blinky and have little braking power.
#365
Sorry v3 508 is for the 2.1v .please drop all the turbo and timing and the red led will blink on the v3.1 which is zero timing state.
#366
Is there another software version like v3_508 i should use to improve it?
These are my settings;
Forward Only with Brake
Drag Brake - 0%
Brake Strength - 100%
Initial Brake - =Drag Brake
Thank you
#367
Hi guys I need help :-s
Been using my v3 in my off-road buggy in mod settings with no problems, I moved the ESC into a touring car on a 13.5 and updated the esc with the latest firmware, changed the software settings to 13.5 and now my on/off button doesn't work? I've upgraded the software on the ESC a few extra times to make sure it wasn't that and double checked all cables and settings etc that I can find. I'm not a newby but Is there something I'm missing or does it now have a fault?
Cheers
Been using my v3 in my off-road buggy in mod settings with no problems, I moved the ESC into a touring car on a 13.5 and updated the esc with the latest firmware, changed the software settings to 13.5 and now my on/off button doesn't work? I've upgraded the software on the ESC a few extra times to make sure it wasn't that and double checked all cables and settings etc that I can find. I'm not a newby but Is there something I'm missing or does it now have a fault?
Cheers
#368
Tech Adept
Hi guys I need help :-s
Been using my v3 in my off-road buggy in mod settings with no problems, I moved the ESC into a touring car on a 13.5 and updated the esc with the latest firmware, changed the software settings to 13.5 and now my on/off button doesn't work? I've upgraded the software on the ESC a few extra times to make sure it wasn't that and double checked all cables and settings etc that I can find. I'm not a newby but Is there something I'm missing or does it now have a fault?
Cheers
Been using my v3 in my off-road buggy in mod settings with no problems, I moved the ESC into a touring car on a 13.5 and updated the esc with the latest firmware, changed the software settings to 13.5 and now my on/off button doesn't work? I've upgraded the software on the ESC a few extra times to make sure it wasn't that and double checked all cables and settings etc that I can find. I'm not a newby but Is there something I'm missing or does it now have a fault?
Cheers
#369
I have it blinky mode thanks, my issue is lack of braking power. I was running a v3 in 17.5 boosted (reedy as well) which had great brakes, but since upgrading to the v3.1 for 13.5 the brakes are very weak.
Is there another software version like v3_508 i should use to improve it?
These are my settings;
Forward Only with Brake
Drag Brake - 0%
Brake Strength - 100%
Initial Brake - =Drag Brake
Thank you
Is there another software version like v3_508 i should use to improve it?
These are my settings;
Forward Only with Brake
Drag Brake - 0%
Brake Strength - 100%
Initial Brake - =Drag Brake
Thank you
#374
#375
Tech Apprentice