![]() |
8th buggy steering servo suggestions
Hi all,
After some ideas for a good 8th nitro buggy steering servo, something with enough torque and as fast as possible, running on 6 volts! Thanks! |
Originally Posted by DaveG28
(Post 10624399)
Hi all,
After some ideas for a good 8th nitro buggy steering servo, something with enough torque and as fast as possible, running on 6 volts! Thanks! |
What is the price range?
|
Open on price, as long as it buys quality!
I could also run on 7.4 if my receiver can handle it, a Sanwa 451R? Though have only run on 6.0v before. Savox and KO RSG seems to have awesome speed!? |
the 7.4 high voltage servos are not what they are cracked up to be. they pull alot of voltage. i run the savox servos now and have to charge the 7.4volt receiver battery after 2 heats an practises. first time out with them i ran all day an made 1 lap in the amain and it went too low to work. i run outlaw 8th latemodels. so after every 2 heats i have to charge it back up. now when i ran the futaba 9350/9351 servos, i could got 2 weeks without charging the 6 volt lipo or nmh pack. something to think about for you. i got use to it because i also fly airplanes too. i do have 1 9350 and 2 9351 servos left for $50 apiece if you are still looking to get good ones.. 9351's are still in my mugen buggy..just pm...
|
Originally Posted by GASSPRINT1
(Post 10628338)
the 7.4 high voltage servos are not what they are cracked up to be. they pull alot of voltage. i run the savox servos now and have to charge the 7.4volt receiver battery after 2 heats an practises. first time out with them i ran all day an made 1 lap in the amain and it went too low to work. i run outlaw 8th latemodels. so after every 2 heats i have to charge it back up. now when i ran the futaba 9350/9351 servos, i could got 2 weeks without charging the 6 volt lipo or nmh pack. something to think about for you. i got use to it because i also fly airplanes too. i do have 1 9350 and 2 9351 servos left for $50 apiece if you are still looking to get good ones.. 9351's are still in my mugen buggy..just pm...
|
Is anyone running the KO servo's, for example the specs on the KO 30100 look amazing!?
|
Originally Posted by madweazl
(Post 10628834)
The Savox draw a ton of power. I run the Hitec 7950s for steering duties on my 1/8 vehicles. Been in the buggy 3 years now, zero failures, and with the Losi 2000mah LiPo receiver battery, it lasts forever (easily last 2 race days) with a 7940 on throttle. While the Savox may not be what you expected, the Hitec will be more than you expect. Fantastic servos!
|
Originally Posted by DaveG28
(Post 10629098)
Are you running those on 7.4 or 6v? Do you find they have good speed?
|
Savox are great for the price. If you're running a decent battery they are fine. I ran the 1258tg's for throttle and steering.
I then switched to Radiopost multi-types. You can't beat the speed, strength, smoothness, and support. 4 S's i guess you'd say! Check them out, they're awesome. |
I've been running a Futaba BLS452 in mine.
|
Radiopost
|
Originally Posted by madac
(Post 10649346)
Radiopost
|
Originally Posted by GASSPRINT1
(Post 10628338)
the 7.4 high voltage servos are not what they are cracked up to be. they pull alot of voltage. i run the savox servos now and have to charge the 7.4volt receiver battery after 2 heats an practises. first time out with them i ran all day an made 1 lap in the amain and it went too low to work. i run outlaw 8th latemodels. so after every 2 heats i have to charge it back up. now when i ran the futaba 9350/9351 servos, i could got 2 weeks without charging the 6 volt lipo or nmh pack. something to think about for you. i got use to it because i also fly airplanes too. i do have 1 9350 and 2 9351 servos left for $50 apiece if you are still looking to get good ones.. 9351's are still in my mugen buggy..just pm...
|
Originally Posted by GASSPRINT1
(Post 10628338)
the 7.4 high voltage servos are not what they are cracked up to be. they pull alot of voltage. i run the savox servos now and have to charge the 7.4volt receiver battery after 2 heats an practises. first time out with them i ran all day an made 1 lap in the amain and it went too low to work. i run outlaw 8th latemodels. so after every 2 heats i have to charge it back up. now when i ran the futaba 9350/9351 servos, i could got 2 weeks without charging the 6 volt lipo or nmh pack. something to think about for you. i got use to it because i also fly airplanes too. i do have 1 9350 and 2 9351 servos left for $50 apiece if you are still looking to get good ones.. 9351's are still in my mugen buggy..just pm...
Running Unregulated Has nothing to do with the Savox servo's being Power Hungry, There are a few Reports out there about a Few of the Savox servos pulling 10+ Amps at Stall. :eek: |
| All times are GMT -7. It is currently 10:31 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.