Fatam

iTrader: (6)

I just got it soldered up all the leads and pluged it in. The esc is doing nothing for about 5 seconds or so then beeping and flashing all lights. Any one got any ideas.

crusey_aus

iTrader: (3)

Is the ESC setup for the correct battery type ?

Have you calibrated the ESC to your transmitter ?

Cheers

Fatam

iTrader: (6)

No nothing yet as it was the first time I plugged it in and it won't let me go into any programming mode

BigRM

Turn on the radio and ESC

Hold down the "Mode" button for approximately 3 seconds.

You should now be in calibration mode.

Neutral throttle (chime), Full throttle (chime), Full Reverse (chime), ESC will then save your settings and reboot.

You should now be able to program the ESC.

http://www.teamtekin.com/manuals/RX8Manual.pdf