R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   Rewiring servo (https://www.rctech.net/forum/radio-electronics/516572-rewiring-servo.html)

shano83 05-24-2011 04:13 AM
Rewiring servo
 
Hey guys i want to lose the red black and white servo lead and resolder black ones in.I have opened the servo case and the servo wires where they meet the board have dryed glue from a glue gun (i think).
Whats the best way to remove this without damaging the board in the servo.
Cheers

shano83 05-25-2011 01:34 AM
ANYONE????

Dlewis4 05-25-2011 11:50 PM
Not many people actually do that... Most people sharpie the wires. Take your time and looks just as good.

shano83 05-26-2011 01:12 AM
Originally Posted by Dlewis4 (Post 9167182)
Not many people actually do that... Most people sharpie the wires. Take your time and looks just as good.
Yeah i know but after a while it rubs of and then looks like crap.

ohh EPiC FAiL 05-26-2011 02:05 AM
just color the wires with a sharpie and whatever slack is left in the wire put heat shrink on, then when if it starts to rub off you won't have as much to redo. i'm fairly confident in my soldering skillls, but i don't think i'd wanna resolder wires on a servo

shano83 05-26-2011 03:32 AM
Originally Posted by ohh EPiC FAiL (Post 9167441)
just color the wires with a sharpie and whatever slack is left in the wire put heat shrink on, then when if it starts to rub off you won't have as much to redo. i'm fairly confident in my soldering skillls, but i don't think i'd wanna resolder wires on a servo
Cheers guys i have decided to just colour the wires and do what you said epic.


All times are GMT -7. It is currently 04:26 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.