azeroth

iTrader: (21)

ok i finally intalled my V3.1 in my 1/10 TC with a speed passion 17.5 (blinky) radiopost radio and reciever installed it saturday night went threw made sure radio was calibrated and set up the esc no problem travel hour and half to race and didnt get one full lap underpower very coggy on start up if you backed off from full to 3/4 throttle and get back on it's dead let off all the way and sometimes will go sometimes it wont tried switching radio (forward and reverse throttle setting) recalibrated each time rebound radio tried a glitch buster all to no avail samething what the heck am i doing wrong or did i just get a bad one new outta the box? very disapointed at this point.

jmc23

iTrader: (9)

OK thank you

Slotmachine

iTrader: (4)

Do you happen to know if you have your anti-lock brakes turned on? That is a no no when calibrating.....we will put our heads together collectively and get you fixed up.
Paul

Slotmachine

iTrader: (4)

Yes you need to hook up to your pc and update your card........
Paul

WolfrtLosi

I am considering getting a Tacon 3650-540-8.5T 3 Pole Sensored Motor for my 2wd SCB.

I am keen on a HW esc but i am a bit confused on which one would best suit my needs?

I will only ever be running 2s, and wouldn't go below the 8.5t motor.

Can anyone give me some pointers please?

azeroth

iTrader: (21)

they where not on that i know of on the first time and i know they were not on at the second and third time threw it if the lot is not icy today i will try and run it again but it sure would work yesterday at all

Cappy

iTrader: (16)

How well does the XERUN 120A V3.1 ESC BLACK 2014 Edition work in a b44.3 ?

FastPete

iTrader: (44)

I would think it would work great. I run one in a DEX410.

Cappy

iTrader: (16)

What i thought .. Thanks Pete !!

Dan.J

iTrader: (21)

Anyone?

Slotmachine

iTrader: (4)

Yes I ran 1 this fall and it was faster than the guys running other types of motors with the same kv rating.

I run 1 in my D413 hotbodies and I love it, now tgat I have traction I am going to boost mine a bit.

You would do well with the 2.1, why not just get a combo?
It comes with the program box. It will run blinky and if you choose you can boost it and put in timing.
You can picknone up at Falconsekido.com
http://www.falconsekido.com/products...s-esc-for-10th

Paul

AlanHall

iTrader: (43)

does anyone know why my stkv3.1 would lose its settings? i had it the buggy/sct profile last time i used it. i switched it to a different car and itsnow back in the modified profile. i surely dont think i hit restore defaults, if that would even do it.

Leealan525

Can someone please help. I have the 150A Esc with the 2250 KV motor for 1/8th scale ebuggy. I am running a 4s lipo. The other day while at a race about 5 laps into my first run. the car stopped moving everything powers up fine now but when I apply throttle the motor will not move but the wires connecting the esc and motor physically move. The motor will turn freely by hand but will not move when throttle is applied.

FastPete

iTrader: (44)

Not sure on that one. Mine hasn't done that.

FastPete

iTrader: (44)

Just to follow you, it wont move even after it cools down?