Spectrum DX2.0 Servo Interference Problem
 

I have a Spectrum DX2.0 system that I replaced the original servo's that came with the Losi 8ight RTR 1.0.

I have a Savox 1256 TG for the steering servo, and I am using a XP Digital DS1313 for the throttle.

The orginal servos worked fined no problems. Now that I have installed the new servo's when I turn the steering left, the throttle servo goes crazy and the steering goes crazy as well.

At this point all I have done is essentially unplug the old and installed the new and this is what is happening.

Any ideas as to what I need to do would be much appreciated.

When I switched over to digital servos - I had the same issue. The Rx voltage would drop due to the draw of the servo. Installed a Spektrum cap - issue solved.

http://www.spektrumrc.com/Products/D...ProdID=SPM1600
http://www.gshobby.com/images/SPM1600-250.jpg

Thanks for the information, that's probably what's happening to me.