R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   gtb and lipo (https://www.rctech.net/forum/radio-electronics/471499-gtb-lipo.html)

TZona 01-15-2011 02:55 PM

gtb and lipo
 
are all gtb lipo safe? how can i tell

burnineyes 01-15-2011 03:52 PM

Earlier GTBs did not have a lipo cutoff, I know this for sure, but I am not sure if there is an easy way to tell the difference

rangerjkb 01-15-2011 04:58 PM

I'd check the part #'s on the old and new to determine the difference. I'm sure Novaks site also has pics/capabilities.

Duster_360 01-15-2011 05:24 PM

I'd wait for some input from Novak rep, NovakTwo....

racer1812 01-15-2011 09:05 PM

The older ones without the LVC look the same as the later models that have it. You can e-mail Novak with the serial number, little white sticker on the side of the case, and they can tell you if it has LVC or not. Give Novak Two a day or two and he will confirm or deny this:D

There is no way to tell by "looking" at them.

This is assuming that by "safe" you mean it has a Lipo Cut-off, you can run
2S lipo on any esc that will run on 6-7 cell nimh/nicd. The LVC is the only reason some say not to run lipos on certain esc's.

NovakTwo 01-16-2011 07:04 AM

To get the lipo cut-off info, contact [email protected]. They will research the serial numbers and let you know which version GTB you own.

Another option, would be to replace your old GTB (if it has no cut-off) with a newer version that has this circuitry. For an older GTB you could add a SmartStop 2S cut-off module.

TZona 01-20-2011 05:44 PM

how long does this take? i sent a email on monday

Duster_360 01-21-2011 04:53 AM

I prefer calling -

http://www.teamnovak.com/cs/index.html


You never know for sure that some junk filter didn't trash your email.

NovakTwo 01-21-2011 06:34 AM


Originally Posted by TZona (Post 8520376)
how long does this take? i sent a email on monday

If we received your email (not trapped in our spam filters) it should take fewer than 24 hours for a response. I would suggest re-sending your email or calling.


All times are GMT -7. It is currently 10:59 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.