R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   need some help (https://www.rctech.net/forum/radio-electronics/471376-need-some-help.html)

latemodel10 01-15-2011 03:18 AM

need some help
 
i just traded for a mini latemodel with brushless motor and spektrum 3.0 radio when i went to run car lastnight in parking lot and check it out it would jerk when it first took off then would go and when you let off and gave it throttle again it would go in reverse and go about full throttle and you would have no control over it any ideals what would be wrong?

T. Herwig 01-15-2011 10:37 AM

Make sure there are no cuts in your receiver antenna. Also, make sure this is not wrapped around anything.

morris 01-15-2011 10:43 AM


Originally Posted by latemodel10 (Post 8490827)
i just traded for a mini latemodel with brushless motor and spektrum 3.0 radio when i went to run car lastnight in parking lot and check it out it would jerk when it first took off then would go and when you let off and gave it throttle again it would go in reverse and go about full throttle and you would have no control over it any ideals what would be wrong?

also sounds like a cogging issue..recalibrate ur esc to the radio.and if running a senor cable..it also might be bad..try calibrating first though.

RCaddict0 01-15-2011 10:58 AM

Yea! +1 on the radio
 
You need to check out your radio. :nod: Somethings a miss there!

Duster_360 01-15-2011 01:54 PM

Did you get all this together? Was it working before you traded, or were some changes made with the radio or rcvr before you got it? It sounds like the radio needs to be calibrated to the esc. Whenever there's been a change in the radio, rcvr, or esc, radio needs to be re-calibrated to the esc.

rangerjkb 01-15-2011 05:01 PM

Probably a radio to reciever problem or possibly check all esc wiring for any exposed wires.

latemodel10 01-17-2011 12:20 AM

thanks guys i changed receivers and it is working fine now


All times are GMT -7. It is currently 10:26 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.