R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   Brushless esc help (https://www.rctech.net/forum/radio-electronics/470065-brushless-esc-help.html)

Mikeisawsome90 01-11-2011 08:52 AM

Brushless esc help
 
I want to know if there are any componies that make a senserd brushless esc that can run 3s with a 5.5 motor. I was looking at runing the novak 5.5 balistic motor but they dont have an esc tha can run 3s with that motor. Or tell me other combonations that would be fast. The battery i want to use is a venom 3s 4000 if that helps. Thanks!

skdurbin 01-11-2011 09:18 AM

Run 2s with a 5.5. 3s is waayyy to much. And u will blow the motor. I'd u want to run 3s get a 10.5 or 13.5. But a 5.5 with 2s will be to much even.

phildoggg 01-11-2011 03:03 PM

Really depends on alot of things, car weight ,gearing ect. but a mmpro is sensored, and can go up to 6s. Now the amp draw would prob be pretty high with a 5.5 on 3s.

rangerjkb 01-11-2011 06:19 PM


Originally Posted by Mikeisawsome90 (Post 8470261)
I want to know if there are any componies that make a senserd brushless esc that can run 3s with a 5.5 motor. I was looking at runing the novak 5.5 balistic motor but they dont have an esc tha can run 3s with that motor. Or tell me other combonations that would be fast. The battery i want to use is a venom 3s 4000 if that helps. Thanks!

Tekin and LRP and possibly the Novak are 3 that I can recall at the moment.


All times are GMT -7. It is currently 08:31 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.