![]() |
help poor signal
hai everyone
pls help my rc (v12 size: 1:18 model mclaren) receive transmitter signal only when the antenna of the transmitter touches the antenna of the car and does not even receive signals from the transmitter even when 2 inch away from the transmitter pls help me if videos and picture are required i will upload them as soon as possible |
What kind of radio is it? AM, FM, 2.4ghz? Details please.
|
40Mhz
|
Check for cuts and kinks in the receiver wire. I've never heard of a radio having as severe a problem as you're experiencing, but most of the time, a shortened or damaged receiver wire is the cause of signal issues. Also check the transmitter side and make sure the antenna is screwed all the way down.
|
all wires are soldered clearly
and the antenna is screwed but still i tried coiling copper wire to the antenna of both car and transmitter but still no use |
I'm not too much of an electrician so I don't think I'm of use any longer.
Although, if you're looking for a cheap Tx/Rx, I'll be selling my 2.4ghz setup for $25 shipped. :) |
Oh, you may want to check the voltage that the Rx and the Tx are getting. Might sound like a no brainer, but you never know!
|
can u send me pics of rx and tx
|
but still
if any one out there to help me pls help!!!! |
Here it is:
http://www.okhobby.com/img/p/1027-1735-thickbox.jpg It's just a simple 2.4ghz radio. Used it for 3 weeks. |
fantastic
|
| All times are GMT -7. It is currently 09:03 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.