what futaba servos?
 

hey guys I am running a buggy and truggy for next year and was thinking of going futaba for servos th/st to match my 4pk what would you suggest, I was thinking of the BLS range but not sure about the high current draw?
cheers

Futaba BLS351 servos are in my T 2.0 on both throttle and steering. They are fast and have plenty of torque too.

SPECS: Torque: 4.8V: 173 oz-in, 6.0V: 217 oz-in
Speed: 4.8V: 0.16 sec, 6.0V 0.13 sec


http://www3.towerhobbies.com/cgi-bin...&I=LXRJS4&P=ML

i would recommend getting the BLS351 or BLS352 for throttle/brake and the S9157 for steering, its a airplane servo but works great and last a long time! :nod:

http://www3.towerhobbies.com/cgi-bin...&I=LXVPF0&P=ML

BLS351/352 for the Steering and a BLS451/452 for the throttle/brake. Mine have been in a Losi 1.0 and are now in a Losi 2.0 and have had no problems for 3 years with this combo on NiMh.

just what I thought bls351 steer/bls451 th and how are you guys finding your receiver packs holding up are you getting any less run time?? I am running a 1700 life in truggy and a 1650 nimh in buggy.
thanks

Agreed, I know a lot of the futaba guys and race with them weekly, they have had zero issues. I also run them in my sons buggy.

a 1300 LiFe battery pack is getting about an hour and a half with BLS servos...

when I ran futaba servos I ran 351 and 451 in both buggy and truggy.

ok so this sounds like the go and it should be fine with my life pack thanks guys, now 2 x bls351 and 2 x bls451 ouch thats nearly $500:cry:

I have run a bunch of futaba servos and the most reliable and best bang for the buck is the s9351. I run it for throttle and steering and i run it straight lipo. I have raced 2 pro series seasons straight lipo and havent had one go out yet