|
Novak GTB help.
okay i put a Novak GTB int oa sc10 running lipos. after 3 to 4 laps my brushless slows down and a little red light comes on the ESC when i give it throttle. but after i turn ESC off then back on i give it throttle a blue light light comes on and the power comes back. and i get the same deal again after 3 or 4 laps any ideas why
|
I think you hit LVC on the ESC. Was the lipos fully charged.
|
yes fully charged up......3 to 4 laps then it slows down big time. power light is on little blue lite goes off when i give it throttle to a red light. after i turn off the ESC and back on problem goes away.repeat all over again
|
Originally Posted by Graphite07
(Post 8280842)
yes fully charged up......3 to 4 laps then it slows down big time. power light is on little blue lite goes off when i give it throttle to a red light. after i turn off the ESC and back on problem goes away.repeat all over again
Novak Instruction Downloads Trouble-shooting TeamNovak's One Touch™ Speed Controls Please make your initial email as detailed as possible. Include: ~ speed control (brand/model) ~ motor (brand/wind) ~ number/type of cells ~ battery, brand (c rating/capacity ~ rotor (old/new) ~ connectors used ~ servo (brand/model) ~ radio system (receiver/transmitter) ~ vehicle & gearing ~ warranty claim? ~ lipo cut-off, on/off ~ any external modules (BEC/brand, Glitch Buster) ~ other important info: water damage, corrosive chemical sprays, excess heat, etc |
Make sure it is in lipo cutoff mode. I think the factory setup is in NIMH. If it is in NIMH mode it might do some funny things with a lipo.
|
| All times are GMT -7. It is currently 12:50 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.