R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   How to set failsafe DSS M11. (https://www.rctech.net/forum/radio-electronics/443530-how-set-failsafe-dss-m11.html)

mgtmadness2007 10-15-2010 03:19 AM
How to set failsafe DSS M11.
 
I lost the suplemental sheet for my DSS M11.
How do I set the failsafe for it?

Currently if I turn off my transmitter the throttle opens wide.
I tried turning off the truck, off the transmitter, holding brake, pushing the bind button and turning on both the truck and transmitter with failure.

C Verano 10-15-2010 02:59 PM
Originally Posted by mgtmadness2007 (Post 8074298)
I lost the suplemental sheet for my DSS M11.
How do I set the failsafe for it?

Currently if I turn off my transmitter the throttle opens wide.
I tried turning off the truck, off the transmitter, holding brake, pushing the bind button and turning on both the truck and transmitter with failure.
Turn both transmitter and receiver on.
Move the trigger to where you would like the failsafe to be set at.
Press the binding button on the receiver down for about 4 seconds. LED should flash slow.
Release the trigger after the binding button on the receiver starts to blink fast.

mgtmadness2007 10-25-2010 07:39 AM
Thank You , I will try this Later.


All times are GMT -7. It is currently 07:46 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.