tekin rx8 servo help
 

hey guys i have an tekin rx8 combo in an lst2 was running the standard jr z590 servo's upgraded to airtronics 94359. if i steer really slowly with nothing connected to them it's fine. if i turn steer quickly still with nothing connected the radio just cuts out but i am guess it's not the radio cutting out is the esc cutting out therefore not giving power to the rx. any ideas anyone. i am using spektrum dx3.0 radio and sr3000 rx. i have tried the 2 servos in my truggy with a dx2.0 setup and a mmm combo and it works fine so i am guessing it's not the radio and something to do with the tekin esc. any input would be great.

first thing i would try is buy a capacitor like the one spektrum makes to help handle voltage drop outs http://spektrumrc.com/Products/Defau...ProdID=SPM1600 . im not familiar with the RX8 BEC but it seems like you might be momentarily overloading it. its possible that the BEC is not reacting fast enough to increase the current supply.

when you say nothing connected do you mean the servo's are not attached to the steering of the truck?