R/C Tech Forums - NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE

- - NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE (https://www.rctech.net/forum/radio-electronics/393690-new-hobbywing-stock-supercharged-software.html)

peter.

10-14-2013 11:36 AM

What software should I use to modify for the v3.1 esc
v3.1_121129_beta
v1.1_120526_beta

chachotu

10-14-2013 11:05 PM

Quote:

Originally Posted by COBRARACING (Post 10873188)

good luck buying one from there.

why for this?? bad v3 esc from rcmart????, really i buy one of 2.0 and it cames broke... they change to me.. without cost..

chachotu

10-14-2013 11:19 PM

Quote:

Originally Posted by hyujmn (Post 10877210)

I'm in blinky mode, though. Not using boost. I've tried all of the firmwares, such as the MOD, STOCK, NO TIMING, etc... Every single one of them have this problem.

And like I said, before I switched motors, it was not having this delay. It had excellent response. I switched, then it started doing it. Now it does it with ANY motor, old or new, that I attach to it.

It's pretty frustrating. I've tried everything that I can to keep using the Hobbywing because I liked it a lot.

And like what mulepic was saying, it's much worse on the tracks. Coming out of any corner, there is a huge delay when going to full throttle.

hey man how are your,s battery,s life... when are old it could hapend..

maxepower

10-15-2013 08:26 AM

CHECK SENSOR WIRE!

hyujmn

10-15-2013 10:17 AM

That's an incredibly old post you bumped. That was months ago.

The problem was the sensor board on the motor. I have since changed to all HW ESCs and love them.

andrewd

10-15-2013 11:00 PM

hi

think i am in the right place.

i have a 17.5t and the xtreme stock in a t3 2011.
any pointers on the gearing of the motor and the set up of the esc

thanks

COBRARACING

10-16-2013 01:41 AM

Hi guys

Just a heads up i have no news on availability of the new v10 motors but i can tell you we are working hard on a release date.

COBRARACING

10-16-2013 01:42 AM

Quote:

Originally Posted by peter. (Post 12630946)

What software should I use to modify for the v3.1 esc
v3.1_121129_beta
v1.1_120526_beta

V3.1_121129_beta is what you need to use

peter.

10-16-2013 05:14 AM

Quote:

Originally Posted by COBRARACING (Post 12636140)

V3.1_121129_beta is what you need to use

thanks cobraracing

COBRARACING

10-16-2013 03:06 PM

Quote:

Originally Posted by peter. (Post 12636369)

thanks cobraracing

Your welcome anytime.Anything other information you need please email [email protected]

valk	10-17-2013 05:36 PM

got my program box and car all put together for saturday.what settings should i start with for 13.5 blinky 1/12?
ive set it to mode 2 non timing but are there any other settings i might want to change to get the most out of it in blinky?

skypilot

10-20-2013 10:27 AM

who in the united states has the new multi program box in stock...