R/C Tech Forums - Havoc Pro Problems

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Havoc Pro Problems (https://www.rctech.net/forum/radio-electronics/390131-havoc-pro-problems.html)

Havoc Pro Problems

I just got the Havoc pro for my slash.. wired everything up right.. and went to turn it on.. No led status lights.. the fan turns on and the steering works.. but nothing else.. What am i doing wrong? This is frustrating.. I have a 17.5 Ballistic motor and traxxas link radio..
Help!

Fodarr,

Check to see if the voltage cut-off has been set to 2s, if it is on 1s it will think that the lipo is flat,cheers.

How do i do that if it won't give me any led's lit up?

Quote:

Originally Posted by Fodarr (Post 7295596)

Still no Joy....

Because I am not part of Novak's technical support group, I suggest you email [email protected] with your question, Our regular CS/Tech Support hours can be located here. Before emailing, take a moment to review the instructions (trouble-shooting guide) originally included with your Novak Item:

Novak Instruction Downloads

Trouble-shooting TeamNovak's One Touch™ Speed Controls

Quote:

Please make your initial email as detailed as possible. Include:

~ speed control (brand/model)
~ motor (brand/wind)
~ number/type of cells
~ battery, brand (c rating/capacity
~ rotor (old/new)
~ connectors used
~ servo (brand/model)
~ radio system (receiver/transmitter)
~ vehicle & gearing
~ warranty claim?
~ lipo cut-off, on/off
~ any external modules (BEC/brand, Glitch Buster)
~ other important info: water damage, corrosive chemical sprays, excess heat, etc

The more information you provide in your first email, the more quickly tech support can offer you assistance.