3 channel receiver
#1
3 channel receiver
This may seem like a stupid question but why would car racers need a 3 channels receiver. The cars only use 2 channels steering and ESC. so whats the 3rd one for?
#5
Tech Champion
Not much use for traditional scale electric racers, but:
Mechanical brakes with adjustable mixing off the throttle channel for a 1/8 scale electric conversion.
I’m not sure, but I think some 1/5 scale guys have separate front and rear brakes, adjust front/rear bias.
I think some may use it for adjusting nitro fuel settings.
Dig function on a rock crawler?
4 wheel steering monster truck.
Remote nitro starting.
Nitro reverse as mentioned.
Don’t some monster trucks have 2 speed trannies that you can shift with a servo?
OK, so not all are racing per se.
Mechanical brakes with adjustable mixing off the throttle channel for a 1/8 scale electric conversion.
I’m not sure, but I think some 1/5 scale guys have separate front and rear brakes, adjust front/rear bias.
I think some may use it for adjusting nitro fuel settings.
Dig function on a rock crawler?
4 wheel steering monster truck.
Remote nitro starting.
Nitro reverse as mentioned.
Don’t some monster trucks have 2 speed trannies that you can shift with a servo?
OK, so not all are racing per se.
#6
I use the 3rd channel and remote trigger cable to control my FlyCamOne2 mini digital camera for in-car video.