R/C Tech Forums
Page 1 of 3
1
2
3
Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   PEAK RACING (https://www.rctech.net/forum/radio-electronics/356018-peak-racing.html)

nc-hopsing 12-30-2009 12:44 PM
PEAK RACING
 
3 Attachment(s)
PEAK Racing products are starting to make their way into the market....look for them at your LHS or ask for them if they dont know about them yet.

PEAK will have a full lineup of brushless motors, lipos (with bullet connectors, traxxas connectors or deans connectors), chargers, and servos. :D

Most everything should be available by the middle/end of January....some lipos are available now like the 5400 pictured.

RDOUBLEDAY 12-30-2009 12:51 PM
Originally Posted by nc-hopsing (Post 6783561)
PEAK Racing products are starting to make their way into the market....look for them at your LHS or ask for them if they dont know about them yet.

PEAK will have a full lineup of brushless motors, lipos (with bullet connectors, traxxas connectors or deans connectors), chargers, and servos. :D

Most everything should be available by the middle/end of January....some lipos are available now like the 5400 pictured.
Do they plan on giving any sponsorships?

Jason Turner 12-30-2009 12:53 PM
Sweet! Thanks for the link

Cameron Kellogg 12-30-2009 12:59 PM
Love the sticker sheet, The star logo will go good on my next paint scheme. :sneaky:

Do all the 7.4 lipos have the same case? They are flat on the bottom or do they cell bumps on them.

Any pictures of the motors yet?

Jason Turner 12-30-2009 01:07 PM
I still have my old peak shirt lol.

nc-hopsing 12-30-2009 01:09 PM
Flat on the bottom Cameron....

No pics of motors yet...:( Motors should be available in a couple of weeks......

Not sure how sponsorships will be working if you arent a Kyosho team driver :tire: Try sending an e-mail to [email protected] to see whats up.

Cameron Kellogg 12-30-2009 01:10 PM
Originally Posted by Jason Turner (Post 6783631)
I still have my old peak shirt lol.
:cool: your already styling then. :D

nc-hopsing 12-30-2009 01:12 PM
Originally Posted by Cameron Kellogg (Post 6783648)
:cool: your already styling then. :D
Heck yes he is!!

Jason Turner 12-30-2009 03:03 PM
Oh yeah! Hopsing do you know about the height of the 6000 saddle?

nc-hopsing 12-30-2009 03:54 PM
Originally Posted by Jason Turner (Post 6784121)
Oh yeah! Hopsing do you know about the height of the 6000 saddle?
Probably too tall for the FS :p I believe its about the size of the Reedy pack and in order for that to fit you have to space up the body mount and battery posts and it barely clears the top deck without a little grinding. The 4500 is what I'm going to run and I believe most of the K team as well since it will fit better. I know quite a few of us have been testing the SMC saddle since the ROAR Nats in June and have been very happy with the fit and performance of them, and the PEAK 4500 saddle will be every bit as good and looks to be about the same size without the permanent jumper wire.

Jason Turner 12-30-2009 05:58 PM
Originally Posted by nc-hopsing (Post 6784313)
Probably too tall for the FS :p I believe its about the size of the Reedy pack and in order for that to fit you have to space up the body mount and battery posts and it barely clears the top deck without a little grinding. The 4500 is what I'm going to run and I believe most of the K team as well since it will fit better. I know quite a few of us have been testing the SMC saddle since the ROAR Nats in June and have been very happy with the fit and performance of them, and the PEAK 4500 saddle will be every bit as good and looks to be about the same size without the permanent jumper wire.
That's kinda what I was thinking, but I had to have it so the 6000 is on the way. I have a reedy in mine now so it might fit I hope it's a lil smaller

Jason Turner 12-30-2009 06:03 PM
Originally Posted by nc-hopsing (Post 6784313)
Probably too tall for the FS :p I believe its about the size of the Reedy pack and in order for that to fit you have to space up the body mount and battery posts and it barely clears the top deck without a little grinding. The 4500 is what I'm going to run and I believe most of the K team as well since it will fit better. I know quite a few of us have been testing the SMC saddle since the ROAR Nats in June and have been very happy with the fit and performance of them, and the PEAK 4500 saddle will be every bit as good and looks to be about the same size without the permanent jumper wire.
That's kinda what I was thinking, but I had to have it so the 6000 is on the way. I have a reedy in mine now so it might fit I hope it's a lil smaller

johnnyboy 12-30-2009 06:08 PM
This help at all?

http://www.teamorion.com/orion/produ...r_overview.pdf

nc-hopsing 12-30-2009 08:22 PM
The 4500 will be around 24.5mm tall, the Reedy is listed at 28mm tall and its a pretty close fit. The 6000 is listed at 31.5mm tall :eek: Good luck fitting that beast in there! :lol:

Jason Turner 12-30-2009 09:09 PM
Oh man! Hmm thanks for letting me know


All times are GMT -7. It is currently 07:46 AM.
Page 1 of 3
1
2
3
Show 40 post(s) from this thread on one page

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.