R/C Tech Forums - Hitec 6055MG screw

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Hitec 6055MG screw (https://www.rctech.net/forum/radio-electronics/340598-hitec-6055mg-screw.html)

GrandeGixxer

10-31-2009 04:34 PM

Hitec 6055MG screw

For anyone that is looking to upgrade to these servos, before you go on the wild goose chase that I went on looking for a screw, here is the size. 2-64. For the RC18, I got the 3/8" long one. I drove to many hobby shops, bought the Hitec screw set figuring that it should work(wrong), and finally ended up at a large industrial supply shop. If you are in the San Diego area, I got it at Marshalls in Miramar. Good luck.

burnineyes

10-31-2009 06:57 PM

Thanks for this. I ended up re-tapping mine to a different size, but this will maybe help some guys looking to upgrade.

GrandeGixxer

11-01-2009 05:24 PM

No problem, thats why i posted it up. :nod:

All times are GMT -7. It is currently 05:02 AM.