Servo problems or Reciever problems,
 

hi guys,

just checking if any 1 had encounter this problems before.

i was using a spektrum pro Rx sr3001 with futaba 3003 servo,

its use to be ok no problem, but lately, i notice the the servo was unable to get back to its center position, it will take some time to get back like 2 - 3 seconds. which means 1 lap you can get a straight line , 2nd lap you wont get straight line...

i have cross check with other 3 servo (3003) same problem, but if use KO propo servo, the servo will work fine....

i even tested with other spektrum Rx, same problem with futaba servo but no problem with KO servos...

any comment??

It is probably the servos. S3003 servos are pretty low end servos and have some centering problems.