MX-3 2.4G problem help please???????
 

Ever since I have had it I never had to bond it it came that way. I have been just bench racing with my build bullshitting with it so I ran a tank through it. Now I turned the TX and RX on they both have power mt PT has power servos have power but the reciever wont link to the radio. Please help me I have tried it too many times Maybe I am doing something wrong.

Any help please I am now missing a race because I cant get this thing binded.

Did you read the directions in the instructions? I just recently bought one myself and binded one of the receivers to the transmitter last night:

1) Turn the transmitter on

2) Hold the "ON" button on the receiver (the little button that's inside the chimney looking thing on the receiver)

3) Turn the power on for the receiver

4) You will see the LED on the "ON" button of the receiver start to flash slowly, keep holding the button for 2 more seconds

5) Release the "ON" button on the receiver, and press the "bind" button on the transmitter

6) The LED on the receiver should now flash very fast, binding the receiver to the transmitter.

Hope that helped...

If that does not work contact Airtronics and send it in for repair.