R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   Quick question about DX3S (https://www.rctech.net/forum/radio-electronics/262609-quick-question-about-dx3s.html)

Ciny 12-27-2008 01:32 AM

Quick question about DX3S
 
Just bought a DX3S, opend the box and noticed 2 marks on the controller itself only very small 1's.

1 is a small dent in the top on the back and the other is a small scratch that has taken off the paint on the controller. They are very very tiny but with contorllers being very sensitive, I'm wondering if i should be over cautious and take it back or just leave it as it is and give it a try.

Thanks in advance, i'm probably being over cautious but im still pretty new to all this and its only my 2nd controller.

myrxseven 12-27-2008 04:30 AM

Personally I would do an exchange. If its marked up in ways that wasnt meant to be you really dont know how it was handled.

racer1812 12-28-2008 04:30 PM

For what you pay for a radio it should come out of the box perfect. Your LHS shouldn't have a problem giving you a new one and sending that one back to their supplier.

myrxseven 12-28-2008 05:01 PM

I really do dislike the way the radio is packaged. Why zip tied on a piece of cardboard opposed to styro.:flaming:

bob o 12-28-2008 05:49 PM

One word..........COST
One zip tie is much cheaper that the tooling to do the fome packaging!!!
Bob


All times are GMT -7. It is currently 11:49 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.