Hyperion lab6 balancer wiring
 

Hi,

Just got a hyperion lab6 balancer and a pack of LiPo made by Orion.
There is no direct cable to plug the lab6 to the Orion 3600 pack, which just have 2 input + and - and a small one for balancing.

The issue I've got is that I don't know to which pin I have to connect the balance cable from my LiPo pack.

I have a small plug on the balancer with 7 pins, right one is the black = - and left one is the red = +, but which of the other one do I have to use to balance a 2S pack?

Appreciate your help, as even my dealer and the french distributor were helpless... ;)

Start with the - end of the 7 pin:

1st pin (-) goes to - battery.
2nd pin goes to the small 2mm center battery plug.
3rd pin goes to battery +.
4 to 7 are empty in this case.

Like this:

http://media.hyperion.hk/dn/eos/HP-EOSOUT-CAR2-Diag.gif

It's available from Hyperion. Can't seem to find a Hyperion part number that I'm sure of, but here's a couple pictures/sources:

http://www.maxamps.com/HYP-MULTI-GOLD.htm

http://www.b-p-p.com/product.php?productid=107

thanks ! :blush:

Team Checkpoint makes an adapter plug for this charger as well. i found it at my LHS for like $3.50.

I can't find it on their page, but its designed to work with Orion.



MOmo