Help: DX3.0 Binding intermittent
 

Today at the races, my dx3.0 was working then quit. Th rx is an sr3000. i went over and had no signle to it what so ever. i rebinded(took 3 time) and it ran for about 3 min and stopped again..same issue. i put my other sr3000 in and it worked fine all day long. The 1st rx was used last sunday all day long with no probs. didn't do anything during the week. Any ideas? Take it apart and clean/ check the wires? I bought this in dec 07, should i be having these probs already?

Thanks
Bryan

gday that happend to me it took 3 times to get it bound again but mine stayed bound, did u try and bind it at the race, becasue if some1 else was binding at the same time u may have got 2 controlers bound to it, becasue mine bound to some1 else, try and bind it at home and then if it doesnt work take it apart and see if there is anything wrong inside, eg dirt, water, something shorting the circuit. if there doesnt look to be anything wrong BIN IT..

I have 4 receivers binded to my DX3.0 and have never had to rebind them. It's probably a defect that you will have to send it in for repair.

thanks:tire:

I have read and heard of probs.. the dx3R i have is ok.. have you checked the spektrum site?

i did and found nothing. yesterday i turned it on at home and it worked fine. kinda weird how 1 rx worked and the other didn't at the track